Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Is it difficult to change/ repair a head gasket on a 4runner
Moderators: toaddog, Elmo, DUDELUX
Is it difficult to change/ repair a head gasket on a 4runner
Head Gasket blew after a heater hose poped. The car has a 4y motor and is still driving ok considering it has a blown head gasket. Is it alot of work to change a head gasket without a mechanic? Or should i leave it to a professional?
Re: Is it difficult to change/ repair a head gasket on a 4ru
If you get a gregorys or the likes of manual you can do the job your self4runnerjo wrote:Head Gasket blew after a heater hose poped. The car has a 4y motor and is still driving ok considering it has a blown head gasket. Is it alot of work to change a head gasket without a mechanic? Or should i leave it to a professional?
I think you will find the head will need welding on the rear water ports
This is the most common area of corosion and blown head gaskets
Adrian
Adrian
www.chevtorque.com.au
www.chevtorque.com.au
Who is online
Users browsing this forum: No registered users and 1 guest