Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

HJ60 Steering Box Leak Help Please!!!

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Post Reply
Posts: 199
Joined: Tue Feb 21, 2006 12:21 pm
Location: Berwick, Victoria

HJ60 Steering Box Leak Help Please!!!

Post by QIKAZZ »

Hey guys, after a weekend in the high country, come home a day early because the Mrs shite herself on the first day between Talbotville and Wonnangatta on a steep rocky hill climb (I think it was Station Track), and having a death match on the same tack at a narrow section with 3 other 4by's as to who was going to reverse. (I give her dues as this was the 1st time she had ever been wheelin with me), Then getting home a day early only to have my Lightforce 240 blitz stolen from outside my house that night (When we should have still been camping) Now I find that the power steering is leaking fluid, it appears to be around where the shaft goes into the steering box, any ideas if there is simply a seal in there? if so does anyone have a part number or anythin? Otherwise what are my options?

Cheers

Azz
Last edited by QIKAZZ on Thu Nov 09, 2006 6:00 pm, edited 1 time in total.
RC Hobbies - Online Store - http://www.qikazz.com.au
Posts: 1293
Joined: Mon Jul 18, 2005 10:58 am
Location: Location Location

Post by vSAHARAx »

This info would also be of assistance to me im on my 2nd steering box in 12 months and its leaking again!

Sorry to hear about your weekend and most of all your spotties, there are some low lives out there.
GXL HDJ80 Cruiser - Lifted, Locked, 315's, 3" Zorst, Safari Intercooled, High Flowed Turbo, All the fruit. AMMS tuned coal shovel, Pushing 148rwhp... + heaps of the black sooty goodness...
Posts: 199
Joined: Tue Feb 21, 2006 12:21 pm
Location: Berwick, Victoria

Post by QIKAZZ »

Noone has any suggestions?
RC Hobbies - Online Store - http://www.qikazz.com.au
Posts: 199
Joined: Tue Feb 21, 2006 12:21 pm
Location: Berwick, Victoria

Post by QIKAZZ »

Someone must know, pleassssssssse haha.
RC Hobbies - Online Store - http://www.qikazz.com.au
Posts: 568
Joined: Fri Jan 10, 2003 6:38 pm
Location: Darwin

Post by Sixty »

No idea with a part n# for the seal. Best bet would be to ring around the steering wksp's for a price.
Had mine rebuilt bout two years ago for bout $350-400(? too long ago!) when the pitman arm bearing decide to become lazy ;)
Luv the sound of a diesel,
especially a Chev 6.2!
Its GONE.........Replaced by a qik HDJ105.

The bigger the boy, the bigger the TOY!!
Posts: 1516
Joined: Wed Mar 10, 2004 3:36 pm
Location: melbourne australia

Post by pcman »

we reco these at work but 300-400 it will cost ya

on the cheap just take it apart and then take the seal into cbc bearings or any bearing joint and they will match it up prolly cost ya 5bux in parts and a few hours labour

ive seen rebuild kits on ebay for around 75 i think
Post Reply

Who is online

Users browsing this forum: No registered users and 47 guests