Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

2.8 lux diesel burning coolant

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Post Reply
Posts: 1562
Joined: Sun Nov 21, 2004 7:26 pm
Location: Blue Mountains

2.8 lux diesel burning coolant

Post by -Richo- »

After having some overheating issues (rad caked with mud, water boiling out completely) a few weeks back i have been having some intermitent cooling issues. I have replaced the rad with a new one, new thermo and new hoses. While replacing the rear main seal i found some coolant in the oil which i assumed would be from a busted head gasket. Pressure tested the rad and it came up good, the cap was faulty and replaced that with a good one. After this it stopped over heating but even after a short drive i could hear it boiling over into the overflow but it wouldnt go over half way on the temp gauge while driving. Also i ran the engine for 20 mins looking for bubbles in the coolant, not a single one.

I have now removed the turbo to be rebuilt as it is water cooled and also is oiled from the engine oil i thought maybe this is the problem, but it looks like it isnt. There appears to be no water in the turbo whatsoever.

Just the other day while parked on a slight angle (passenger side down) it started to bellow out white smoke and it smelt like coolant, the engine wasnt running rough or anything just blowing smoke only while on an angle, driving straight is was blowing only a small ammount of smoke. It was as if coolant was leaking into the exhaust or something?? (thats why i thought the turbo).

Could it be something other than the head gasket? i have half of the stuff off the head ATM so i figure i might as well do the head gasket and water pump as well, but id like to get ideas from others who may have had similar probs or dealt with these engines before in case it could be something else (or something simple).
Yurich Design Services
www.yds.net.au
Posts: 338
Joined: Tue Dec 27, 2005 7:20 pm
Location: QLD Ipswich

Post by 4x4Monkey »

its a head gasket for sure
get a monoxide dye tester.....
Dont worrys There's No Sugar

My 4x4 Is too clean.... Needs a Mud Pack
Posts: 337
Joined: Tue Jan 18, 2005 10:16 pm
Location: Gympie

Post by small talk »

Or a sniffer :D Theyre cool.
1984 Hilux dualcab.
Posts: 2404
Joined: Fri Jul 07, 2006 9:00 pm
Location: Ipswich

Post by Sic Lux »

Well some how you have coolant getting into the oil. cracked head or head gasket would be a good place to start just hope like hell it ain't a water jacket in the block never herd of this but i'd say it could happen and it's very strange how it blew alot of smoke on the angle and smelt like coolant very strange hope it is some thing easy never herd nothing like it.
plenty of parts on the bench
Posts: 1562
Joined: Sun Nov 21, 2004 7:26 pm
Location: Blue Mountains

Post by -Richo- »

well im going to pull the head off tonight, thanks for the replies.
Yurich Design Services
www.yds.net.au
Posts: 1826
Joined: Wed Mar 03, 2004 9:14 pm
Location: nsw

Post by plowy »

the boiling noise is from a blown head gasket or cracked head
its the compression from the cylinder escaping threw the the head or gasket into the cooling system and the out threw thew overflow bottle
Posts: 1562
Joined: Sun Nov 21, 2004 7:26 pm
Location: Blue Mountains

Post by -Richo- »

the head is forking cracked :bad-words:
Yurich Design Services
www.yds.net.au
Posts: 6021
Joined: Sat Feb 15, 2003 11:01 pm
Location: Shed.

Post by dumbdunce »

Drop Bear wrote:the head is forking cracked :bad-words:
stop being a cry baby and get it welded or get a new head. it's pretty common on smaller diesels especially when you boost them.

of course you could just take the opportunity to jam a V8 in there ;)
Free air locker to the first 20 callers!
Posts: 1562
Joined: Sun Nov 21, 2004 7:26 pm
Location: Blue Mountains

Post by -Richo- »

dumbdunce wrote:
Drop Bear wrote:the head is forking cracked :bad-words:
stop being a cry baby and get it welded or get a new head. it's pretty common on smaller diesels especially when you boost them.

of course you could just take the opportunity to jam a V8 in there ;)
i contemplated welding it for about 5 seconds, ill just get an aftermarket head for it to get it running. Lexus V8 is on the cards but i cant afford it now and i want to have a running engine to sell to help pay for it.
Yurich Design Services
www.yds.net.au
Posts: 6693
Joined: Mon Feb 09, 2004 10:13 pm
Location: Newcastle

Post by high n mighty »

I'm spewing. Now I know why my magna does the exact same thing in the last week or so :bad-words:

Looks like I better rego the hilux this month then, grrr :oops:
[quote="fool_injected"]
I pity my brother when she is a teenager[/quote]
Post Reply

Who is online

Users browsing this forum: No registered users and 56 guests