Just wanted to find out what's required to fit the "flexiglass chellange" hard top to the zook, does it just go straight on or is a mounting kit of some kind required? any info appreciated as I am looking at purchasing one second hand.
Cheers
Haydn.
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Zook Hard Top Q?
Zook Hard Top Q?
97' PAJERO SWB GLS :: 97' ZOOK
The zook I bought came with one.
The rear section is pretty easy, four holes drilled through the top of the tub, two each side. The canopy sits on the tub, four plastic wedges sit on the canopy frame and bolts hold it all together.
The front has two plastic quick release hook type things. These are attached to the top of the windscreen frame, not sure if you need to drill new holes, as I said it was already on. The rear of the front section just has two metal tabs with bolts through them, the bolts just tighten onto the targa bar or whatever it's called.
Let me know if you want any pictures, I'll try and take some if I get time.
If you get it take your time and install it properly.
The company that installed mine did a bad job, they didn't align the hooks properly, left the metal backing plates too long, if I try to put a soft top on it will cut it up. And they used cheap nuts and bolts, the nuts are rusting.
The rear section is pretty easy, four holes drilled through the top of the tub, two each side. The canopy sits on the tub, four plastic wedges sit on the canopy frame and bolts hold it all together.
The front has two plastic quick release hook type things. These are attached to the top of the windscreen frame, not sure if you need to drill new holes, as I said it was already on. The rear of the front section just has two metal tabs with bolts through them, the bolts just tighten onto the targa bar or whatever it's called.
Let me know if you want any pictures, I'll try and take some if I get time.
If you get it take your time and install it properly.
The company that installed mine did a bad job, they didn't align the hooks properly, left the metal backing plates too long, if I try to put a soft top on it will cut it up. And they used cheap nuts and bolts, the nuts are rusting.
Mine had one on it when i brought mine! Was pretty much like what msh has said!
There was on ebay the other that went for over $700 so i don't know weather to take the front bit off mine and sell it or keep it?
But it's pretty good to be able to just take the front bit off!
There was on ebay the other that went for over $700 so i don't know weather to take the front bit off mine and sell it or keep it?
But it's pretty good to be able to just take the front bit off!
Built swb sierra, building a lwb sierra ute and have a dmax for family camping
Who is online
Users browsing this forum: No registered users and 0 guests