GDAY
i have a suzuki sierra, and i have a vitara 1.6 engine to put in yet, but i want power steeering how do i go aout getting it, how much will it cost, and is there andone around melbourne who i can get it off..
Dan!
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
power streering for a sierra
power streering for a sierra
uh huh
powersteering
Have you searched the bible?? liam fom bbm has power steering in his zook it got a baleno motor and dana 44s give him a call
Re: power streering for a sierra
hi bud. jimny power steering bolts strait up to the sierra. usually around the $350 all the way to $600.Daniel wrote:GDAY
i have a suzuki sierra, and i have a vitara 1.6 engine to put in yet, but i want power steeering how do i go aout getting it, how much will it cost, and is there andone around melbourne who i can get it off..
Dan!
vitara power steer will bolt on but you need to make a wedge to clock the box back inline with the chassis. you also need to use a different pitman arm either from a jimny or a toyota (i think that was it).expect to pay around the same for this, but being more common to find can be had for cheep.
Mud4b/ OPT, Cheap rates, Not cheap work. Search Opt- option offroad on facebook. Call or Sms 0439609525.. Sunshine coast, Eudlo, 4554.
there a few kits you can use, you could use the full ps kit from a vitara, that way the pump would bolt on, but an adapter needs to be fabricated to bolt the steering box onto the chassis.
I used a full kit from a jimny. With the jimny kit the steering box bolts straight onto the chassis, however some modification of the pump bracket was needed to get the pump to bolt upto the engine, and to also adjust the belt tension.
Ideally if you could, it'd be easiest to get a jimny box and use a vitara pump and bracket and just get some lines made up to suit, but most people probably wouldnt separate a whole ps setup.
But any way you go you will have to make up a mount somewhere to mount the ps reservoir, i just made a small bracket and bolted it to the inside of the wheelwell.
Overall i got the whole jimny setup for $750, vitara is probably round the $4-500 mark.
ps it is the BEST mod i've done so far, makes it so much easier and nicer to drive especially offroad. You will not regret it
I used a full kit from a jimny. With the jimny kit the steering box bolts straight onto the chassis, however some modification of the pump bracket was needed to get the pump to bolt upto the engine, and to also adjust the belt tension.
Ideally if you could, it'd be easiest to get a jimny box and use a vitara pump and bracket and just get some lines made up to suit, but most people probably wouldnt separate a whole ps setup.
But any way you go you will have to make up a mount somewhere to mount the ps reservoir, i just made a small bracket and bolted it to the inside of the wheelwell.
Overall i got the whole jimny setup for $750, vitara is probably round the $4-500 mark.
ps it is the BEST mod i've done so far, makes it so much easier and nicer to drive especially offroad. You will not regret it
98 WT LWB Maruti, 1.6efi, rockhoppers, 2" body lift, 2" springs, 32" BFG muddies, jimny Power Steer, front lockrite :-)
Who is online
Users browsing this forum: No registered users and 2 guests