Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Locker and Gears??

Tech Talk for Mitsubishi owners.

Moderator: -Scott-

Forum rules
Post Reply
Posts: 30
Joined: Wed Apr 06, 2005 10:55 am
Location: Venezuela, South America

Locker and Gears??

Post by Alej Altuve »

I want to put a ARB rear locker in my paj but i'm not sure of the model ?? Its has drums brakes and 4.625 gears, also I don't know if I can put some crawlers gears (don't have super select) my transfer case is similar to the Challenger but it has Neutral position, I think it's called Easy select?? I really appreciated your help. Thanks
Montero 98, Gen2, Leaf sprung, 5sp man, 3.0 lt 12 valve, 4.625 gears, 1.925 T-case, custom snorkel, custom bull bar, custom shackels, add a leaves, 2inch lift, CB radio, 32x11.50 Pirelli AT.
Top
Posts: 14209
Joined: Sun Jan 11, 2004 11:36 am
Location: Adelaide

Post by -Scott- »

OK, my 2c...

ARB does have a locker for the 3.0 rear diff. Your diff ratio doesn't matter, because you're only replacing the hemisphere, which bolts to the crownwheel.

Similarly, I believe the 2.85 gears will fit the easy select transfer - if there's any available.
Top
Post Reply

Return to “Mitsubishi”

Who is online

Users browsing this forum: No registered users and 1 guest