Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Wheel Question

Tech Talk for Suzuki owners.

Moderators: lay80n, sierrajim

Forum rules
Post Reply
Posts: 11
Joined: Sat Feb 18, 2006 6:29 pm
Location: Canberra

Wheel Question

Post by mitch774 »

Gday,

I was wondering if it is possible to take the wheels of my sierra and put them back on in reverse so that it sits a little bit wider.

All help appreciated,

mitch
Top
Posts: 14187
Joined: Wed Apr 30, 2003 8:09 pm
Location: Trip Trip Trappin' across a bridge

Contact:
Contact Goatse.AJ

Post by Goatse.AJ »

NO.

Either get a wider offset wheel or get them professionally cut and flipped.
bru21 wrote:What happens in goat, stays in goat!
Top
User avatar
lay80n
God Of Emo
Posts: 7350
Joined: Sun Aug 24, 2003 7:04 pm
Location: Newy, home of the ZOOK (Rockin the 'diff)

Contact:
Contact lay80n

Post by lay80n »

The reason behind this is that the holes that the studs go through are tappered so that the tapper on the wheel nut locks into this, locating the wheel and stopping the nut from coming undone.

In short NO NO NO NO NO.



Layto....
[quote="v840"]Just between me and you, I actually really dig the Megatwon, but if anyone asks, I'm going to shitcan it as much as possible! :D[/quote]
Top
Posts: 6229
Joined: Thu Dec 12, 2002 10:37 am
Location: melbourne victoria australia

Contact:
Contact christover1

Post by christover1 »

Some Sierra stock wheels have taper both sides, mine did.
If so You can reverse the rears, but the front will hit the discs, so cant do.
I ran rears backwards, and fronts offset to match for many years.
(about 30mm difference)
It was a bugger crawling under a muddy truck to air down or up.

I would not recommend it, but I did it fer ages.
christover
4WD SUZUKI CLUB VICTORIA
http://www.vic.suzuki4wd.com/forum/
Top
Posts: 2955
Joined: Thu Feb 16, 2006 10:19 am
Location: Melton

Post by suzuki boy »

I'm probably getting some of these with a guy off here for $48 eeach :shock:

They have -15 off set and should allow me to fit 31's :P

http://www.speedywheels.com.au/steel.htm
Built swb sierra, building a lwb sierra ute and have a dmax for family camping
Top
Posts: 5
Joined: Thu Sep 14, 2006 5:20 pm

Post by jord »

I am also looking for a set of wheels with a bit more offset to fit 31s. what should i ask for at a wheel place. I have asked about f100 rims to suit the sierra but they werent much help. how much wider are the f100 rims, offset wise. cheers
Top
Posts: 11
Joined: Sat Feb 18, 2006 6:29 pm
Location: Canberra

Post by mitch774 »

thanks for your replies guys. my wheels are tapered on both sides so i decided to give it a go just to see what it looks like. the back wheels are fine but the front left wheels rubbed on the brakes so ill take it off.

thanks again
Top
Post Reply

Return to “Suzuki”

Who is online

Users browsing this forum: No registered users and 0 guests