my mate has a 83 suz 1000cc motor 2 inch lift and 30"mudds and when he trys to get up a not very steep hill it just stops any idear what it could be ? but it mostly dose it in 4wd
thanks
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
suz engine trubble
suz engine trubble
IF YOU OVER TAKE ME I WILL FOLLOW YOU HOME AND S*#T IN YOUR SLIPPERS
Mine has 30's and has no worries on angles with stock geraing(Although reduction gears are on my needed list)! But if the carbi gets crap in it then it's a whole diffent storey!
But the hand over the top of the carby always fixis it up!
But the hand over the top of the carby always fixis it up!

Built swb sierra, building a lwb sierra ute and have a dmax for family camping
X2ronoor wrote:sounds like a float issue
I had the same problem and only noticed it when i went the larger tyres.
Now i have the crawler gears i can keep the revs high enough to overcome the problem.
Simon...
Hookers are like bowling balls, You pick them up, put your fingers in them, then throw them in the gutter and they come back for more.
Who is online
Users browsing this forum: No registered users and 3 guests