Hey guys
was just wondering as i was lookin through other peoples zooks.
has anyone got 33s on without Spoa ??
would 2inch body, 2inch springs, shackles be enough ??
or would u need 2 inch body, 2inch springs, shackles and virtual be needed ?
im probaly goin to go 2 BL 2 springs and 31s just wondering what alse it would take. as im gonna get gears for the 31s probaly.
dont wanna spend $1300 on a new set of 31s then in 6 months wanna spend it again for 33s.
Cheers guys
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
33s what has people done to fitt
I have fitted 34in Swamper LTB's to my project car.
I have fitted 2in body lift and new OME 2in lifted with RUF. I have then trimmed to make it all fit. My rims have a bit of offset as well which meant I had to cut into both the firewall and the headlight bucket.
Rears only needed minor trimming but I cut the bottom edge off the back where the bumper used to sit. There are some side on pics in the members section.
note that I also spaced the front bump stop by 50mm.....
here is a couple pics of what I did to the front guard area.
I have fitted 2in body lift and new OME 2in lifted with RUF. I have then trimmed to make it all fit. My rims have a bit of offset as well which meant I had to cut into both the firewall and the headlight bucket.
Rears only needed minor trimming but I cut the bottom edge off the back where the bumper used to sit. There are some side on pics in the members section.
note that I also spaced the front bump stop by 50mm.....
here is a couple pics of what I did to the front guard area.
Yeah I did, but I found tha the bumpstops had to be extended to far. Virtual lift is required.
Why stay spua? I found that it didn't suit my style of wheeling ie: got to hung up on everything.. like shackles.
Why stay spua? I found that it didn't suit my style of wheeling ie: got to hung up on everything.. like shackles.
[quote="STD CONSUMER"]haha, i'm tellin you, my camp was hard to find on Saturday night!
then i shared my bed with 2 second tom... [/quote]
then i shared my bed with 2 second tom... [/quote]
Totally reversable, (mine was) had three seperate roadys donr on it .. never an issue (Still should hae got an engineers through) .. If you are running 33's or even 31's your still illegal end of story.vicelore wrote:Why stay spua?
i just fitted new ome sus woudnt that go to waste if i went spoa ?
highly illegal in vic ?
have to get all the work done on the diffs which is non reversable therefor never goin to pass a roadworthy and i wont be able to sell it ??
No your spring swont go to waste I did a SPOA on my OMEs and they flattened out nicely.. biggest problem I had was they were to soft ... even with a spoa you wil need to move your diff forward a little to fit 33's .. or drop you bumpstops alot ..
" If governments are involved in the covering up the knowledge of aliens, Then they are doing a much better job of it than they do of everything else "
Who is online
Users browsing this forum: No registered users and 2 guests