Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

extractors ??

Tech Talk for Ford, Mazda, Daihatsu & Makes that currently dont have a home.

Moderator: Tiny

Forum rules
Post Reply
Posts: 48
Joined: Tue May 23, 2006 6:07 pm
Location: Sydney, Australia

extractors ??

Post by ferguson »

hey all,

sorry to visit a well worn topic again, but i just have a couple of questions...

* as mentioned previously, apart from mild power loss and oil usage the current original engine i have is going ok, and i might milk it for a while longer, rather than prematurely swap it now. but i am thinking about fitting some extractors. so for future reference, am i right in presuming that extractors for the feroza HD engine will fit straight onto an applause engine, if i end up doing the swap??

* after reading previous posts on the various brands of extractors that people have fitted to their roza's, i was just after an update on the satisfaction in your choice re. performance, fuel consumption improvements, cracks, price etc...

thanks

john
Last edited by ferguson on Tue Nov 14, 2006 3:23 pm, edited 2 times in total.
Top
Posts: 2297
Joined: Mon Mar 06, 2006 1:23 pm
Location: Melbourne-Australia

Post by MightyMouse »

Have "Wildcats" cheap and worth the effort - as the Appluase is the same HD motor there is no problem.

Just checking - you dont mean Applause extractors on a Feroza as they WONT fit.
Top
Posts: 14187
Joined: Wed Apr 30, 2003 8:09 pm
Location: Trip Trip Trappin' across a bridge

Contact:
Contact Goatse.AJ

Post by Goatse.AJ »

You can get Hurricanes from Liverpool Exhausts in Sydney for around $280- $300.
bru21 wrote:What happens in goat, stays in goat!
Top
Posts: 47
Joined: Mon Jun 06, 2005 9:20 pm
Location: UK

Post by Pommie B*stard »

Got a set shipped from MRT to England, had them on since last December.
Some reports floating about from people in the US (I think) that cracks have appeared on some sets.
Nothing untoward showing on mine so far, and the welds look of good standard.
Noticable gains in conjunction with a K&N, old filter box and plumbing removal and cold air feed hose added.

Jon.
Top
Posts: 4760
Joined: Mon Dec 30, 2002 6:04 am
Location: Adelaide

Contact:
Contact murcod

Post by murcod »

MRT are best for DIY - come ready to bolt on with flex and gearbox mount. If you can see before you buy they'd be worth a look. I've got Hurricanes and am still very happy with them.
David
Top
Posts: 48
Joined: Tue May 23, 2006 6:07 pm
Location: Sydney, Australia

Post by ferguson »

murcod wrote:MRT are best for DIY - come ready to bolt on with flex and gearbox mount. If you can see before you buy they'd be worth a look. I've got Hurricanes and am still very happy with them.

david, how did you go fitting in the flex bellows with the hurricanes?? do you still have the gearbox mount??

thanks to all for the input...
Top
Posts: 4760
Joined: Mon Dec 30, 2002 6:04 am
Location: Adelaide

Contact:
Contact murcod

Post by murcod »

I got my father inlaw to weld the flex join on, fabricate up the gearbox mounts and then cut/shut the standard cat joiner onto them. A lot of stuffing around.

The MRT's are supposed to bolt straight on- no welding / cutting/ shutting involved. Bank on having to buy a new oxy sensor and have a plan on what to do if you find a broken manifold stud.... ;)
David
Top
Posts: 48
Joined: Tue May 23, 2006 6:07 pm
Location: Sydney, Australia

Post by ferguson »

yeah, i've been puting off doing the o2 sensor til i had the extractors fitted. i've been quoted approx $400 to supply and fit some hurricanes with some flex and a bracket. don't think the guy i spoke to on the phone is the one who'll be fitting them. i'll have a chat to them on sat morning and make sure we're all on the same page.

thanks
Top
Posts: 7
Joined: Mon Aug 07, 2006 10:53 am
Location: BRISBANE

Post by scotto_feroza »

i got a set of hurricane extractors on my feroza with a full 2 inch exhaust for $500 fitted. ive done a bit of 4x4ing since i got it and there are no cracks i don't think the flex joint is maybe necessary (touch wood). fuel consumption stayed about the same although i did upgrade the tyre size at the same time so probably would give slightly better economy with normal tyres. the extractors really made a difference in the 1900-3500rpm range for me.
SIC fEROZA SXII;
Top
Posts: 48
Joined: Tue May 23, 2006 6:07 pm
Location: Sydney, Australia

Post by ferguson »

just had the extractors fitted... hurricanes with flex and bracket in tact.
you can notice the difference but it's only mild. will fit a new o2 sensor and maybe get a tune when i get the chance. how's the heat!!! is it possible/effective to get it heat wrapped once they're in??
Top
Posts: 4760
Joined: Mon Dec 30, 2002 6:04 am
Location: Adelaide

Contact:
Contact murcod

Post by murcod »

You'll void your warranty is you heat wrap them and they most likely won't last as long. ;)

The increase is subtle, but you should get bigger gains with a free flowing filter now. I got a similar increase after removing the viscous hub fan too - it all adds up!

Get it tuned to run on 98 Octane fuel if you don't mind spending the few extra $$$ at each refuel and you'll get more too.
David
Top
Posts: 48
Joined: Tue May 23, 2006 6:07 pm
Location: Sydney, Australia

Post by ferguson »

i've been running 98 since i bought it (a legacy of the old rover days ). i'll change the o2 sensor, throw a hi-flow filter in and get a tune... it's all good, happy enough with what i've got til the swap/rebuild

thanks once again to all
Top
Post Reply

Return to “Ford / Mazda / Daihatsu / Homeless”

Who is online

Users browsing this forum: No registered users and 0 guests