Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
rear recovery points on the MQ
rear recovery points on the MQ
Up untill now i've been using either my rear bar or t/bar and still not keen at all on the idea, what have others done?
The rear of the MQ comes with a stock tow hook on the back (just to the right of the exaust, there is a small cut out in the rear bar where is sits(, but mine is snapped off.
What i did was drilled one holw in the bottom of the chassis rail ( on the left still), and used a hole that was already there and bolted up a proper tow hook, pretty muh next to the original one and cut out a little extra in the raer bar in the same place and smoothed it off with a chissel.
What i did was drilled one holw in the bottom of the chassis rail ( on the left still), and used a hole that was already there and bolted up a proper tow hook, pretty muh next to the original one and cut out a little extra in the raer bar in the same place and smoothed it off with a chissel.
God of Magnificant Ideas!
Your Hooks gone !!!! My whole bumpers gone !!!!
I replaced the back bumper with a length of 6" channel ( 6mm wall, 10mm flange), cut and weld in a "Haymen Reese" setup and ya laughing !!!, Ive snatched hundreds of times off of this bar and it has towed up to 3 1/2 tonnes............. never moved and is ideal for the bush ( and city driving
)
P/S...... Just modified ChevyMQ's to the same!
I replaced the back bumper with a length of 6" channel ( 6mm wall, 10mm flange), cut and weld in a "Haymen Reese" setup and ya laughing !!!, Ive snatched hundreds of times off of this bar and it has towed up to 3 1/2 tonnes............. never moved and is ideal for the bush ( and city driving
)
P/S...... Just modified ChevyMQ's to the same!
[color=blue][size=150][b]And your cry-baby, whinyassed opinion would be.....? [/b][/size][/color]
Don't suppose you'd be interested in my old bar then? From what you are describing, it sounds like it is the original. Curved light metal with plastic bumper ends and a tow hook welded onto the mount which bolts into the chassis rail. Yours for $50!
* Nothing is foolproof to a sufficiently talented fool *
Who is online
Users browsing this forum: No registered users and 2 guests