Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

GPS and NJ Stereo

Tech Talk for Mitsubishi owners.

Moderator: -Scott-

Post Reply
Posts: 18
Joined: Tue Mar 21, 2006 7:55 am
Location: Northern Beaches, NSW

GPS and NJ Stereo

Post by Lou_MV »

Hi All,

Just got a new Tomtom GPS that has a line out.

I've got the OEM stereo in my NJ and was wondering what's possible in terms of getting the Tomtom audio routed to the speakers?

How easy is it to remove the stereo? Will I be able to patch L&R stereo from the line out? I'm guessing there's no line in on the OEM unit.

Thanks,

Lou
Posts: 1130
Joined: Thu Nov 18, 2004 7:25 pm
Location: New Zealand

Post by NJV6 »

Piece of piss.

2 screws at the top of the surround then pull from the bottom of the saem piece, it unclips at the bottom. :cool:

Then you'll see some more screws holding the unit into place. Very much doubt there will be a line in on your OEM.

NJ
1994 NJ SWB, 3.5, 5 speed manual, 33's, XD9000, 4.9 diffs, Front & Rear ARB's, Safari Snorkel

2008-2009-2010-2011 Pavlova in the shed.
Posts: 18
Joined: Tue Mar 21, 2006 7:55 am
Location: Northern Beaches, NSW

Post by Lou_MV »

OK, that was easy :)

If I want to swap out the stereo for one that has a line in can I reuse the 2 connector blocks that plug into the stereo or do I need to get an adapter?

Ta,

Lou
Posts: 18
Joined: Tue Mar 21, 2006 7:55 am
Location: Northern Beaches, NSW

Post by Lou_MV »

I think I've found my own answer:

Something like this...

http://www.clarionworld.co.uk/install/s ... asp?id=172
Post Reply

Who is online

Users browsing this forum: No registered users and 0 guests