Offset trunion bearings.

Post by **Wendle** » Tue Sep 16, 2003 11:04 am

Where do I get them and how much should I expect to pay :?:

Post by **planb** » Tue Sep 16, 2003 11:37 am

im pretty sure 4way sell these.

Simon should be able to help

9672 8899

$280 odd

half degree, 1 degree and 1.5 degree

Post by **Wendle** » Tue Sep 16, 2003 4:33 pm

Found them locally for $160 per side, anything up to 2.5deg.

Thanks Rhys, I'll ring up 4way and see if that price is per side or for both. BTW, is your truck a goer at the moment??

Post by **planb** » Tue Sep 16, 2003 4:40 pm

yerp

building a track bar as i snapped a shaft the other week on my first real outing,

should be done by sunday,

Post by **bj on roids** » Wed Sep 17, 2003 10:37 am

hey wendle can you tell me how these work?

Post by **Wendle** » Wed Sep 17, 2003 10:57 am

there is a couple different types, I believe. The ones I am getting replace the bearing and cap with a setup that uses a slightly smaller OD bearing, so there is room for an offset shim/cup doodad to fit into the machined reccess in the axle trunion.

Post by **bj on roids** » Wed Sep 17, 2003 2:05 pm

thanks for that, i had these guys going for a while :crazyeyes:

Post by **Wendle** » Wed Sep 17, 2003 2:09 pm

bj on roids wrote:thanks for that, i had these guys going for a while

Camber correction makes baby jesus cry! :silly:

Post by **dumbdunce** » Wed Sep 17, 2003 10:30 pm

correcting camber or castor?

Post by **Wendle** » Thu Sep 18, 2003 8:25 am

dumbdunce wrote:correcting camber or castor?

correcting camber caused by a homebrew hybrid axle :crazyeyes:

I have adjustable links for castor

Outer Limits 4x4 Board

Offset trunion bearings.

Offset trunion bearings.

Who is online