Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

30s or 31s

Tech Talk for Ford, Mazda, Daihatsu & Makes that currently dont have a home.

Moderator: Tiny

Post Reply
Posts: 1
Joined: Wed Nov 08, 2006 5:50 am

30s or 31s

Post by ferwowza »

I have just brought a 91 nt feroza after selling my sierra, and have to sets of wheel+tires, being 30s and 31s i was told that the 30s should fit without any problems but to fit the 31s all i need to do is extent the shackles and wind the front up. How far do i need to extent the shackles considering my rear leafs are in quite remarkable condition (not flat yet), will 180mm hole to hole do it then i just wind up the front and away i go or is there gonna be other problems that need sorting. I can get new shocks etc later as i just want to get one set of wheels on so i can piss the other ones off. Sorry if this question is a little played out.
Posts: 393
Joined: Mon Jun 27, 2005 5:57 pm
Location: Eagleby/ Brisbane

Post by 4x4xmore »

if your not gonna be doing much wheeling then i'd go 30, got 31's on mine and I felt the difference when I come to a hill. Now the front is locked its even worse, now have to find a way to increase tourque so I can retain its offroad capabilities.
89' feroza
2" sus lift
31x10.5x15 mudders



www.fishaholics.biz
Posts: 1908
Joined: Thu Aug 04, 2005 8:09 pm
Location: central queensland

Post by known 2 »

not to mention the xtra strain on the drivline, but they doo look tough,

as for the power loss go all out and throw in a toyota 2.7l
kaylee 2004 hdj78 RV. 33 mickey atz's, winchbar, 3i lift, 3i exhoust, spoties, roofracks and ufh. pimped interior .

86 lwb zook wt soa, 33's, locked, bard up, prety lights. monster tacho:/
Posts: 393
Joined: Mon Jun 27, 2005 5:57 pm
Location: Eagleby/ Brisbane

Post by 4x4xmore »

known 2 wrote:not to mention the xtra strain on the drivline, but they doo look tough,

as for the power loss go all out and throw in a toyota 2.7l
or buy a 2.7l engine and then stick a toyota under it :)
89' feroza
2" sus lift
31x10.5x15 mudders



www.fishaholics.biz
Posts: 312
Joined: Fri May 05, 2006 9:35 pm
Location: Wollongong, NSW Aus

Post by Doc_Acos »

Have you checked the tyre width, and how much room you have to play with on the inside of rear wheel arch and front turning circle?

If the Feroza is a 5 stud 5 1/2" PCD (my memory is shot) you may want to check out the offset on some F150 rims to bolt on it then the tyre should fit fine....
Posts: 85
Joined: Fri Jun 24, 2005 1:07 am
Location: Barbados - Caribbean

Post by BajanFeroza »

I have 30"s on mine. Definatley a bit of a drop in torque, made up for itwith a 38 Webber and new muffler. But ........ I want to go all out for of roading only and put on 33's, now I have seen them on some local suzuki's but not sure how they effect the CV joints etc...
Dance, like nobody's watching (As usual)
Sing, Like their all deaf (Thank god)
Live,
SPEND, because you can't take it with you. (live in DEBT)
Posts: 3132
Joined: Wed Sep 28, 2005 3:22 pm
Location: Newy

Post by HotFourOk »

BajanFeroza wrote:I have 30"s on mine. Definatley a bit of a drop in torque, made up for itwith a 38 Webber and new muffler. But ........ I want to go all out for of roading only and put on 33's, now I have seen them on some local suzuki's but not sure how they effect the CV joints etc...
The suzuki's have different gearing combinations available whereas Feroza's pretty much don't.

The can use different diff ratios easily, and use different transfer case gears. A lot of them also dont have stock axels over here that are running 33".
Post Reply

Who is online

Users browsing this forum: No registered users and 2 guests