Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

2H tacho sender??

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 422
Joined: Wed Nov 22, 2006 1:47 pm
Location: surf coast, victoria

2H tacho sender??

Post by cruiser60series »

What's/Where's the tacho sender on a 2H? I've bought a car with an engine conversion (2F to 2H) and want to rewire the tacho - already have all the parts neccessary. Cheers, Mick.
Top
Posts: 541
Joined: Sun Sep 28, 2003 5:04 pm
Location: in the shower..

Post by carts »

As far as i know, the tach sender is located on the bell housing in a 2H. It measures the rpm of the crank off the fly wheel.
If you want a spare 60 for bits-
http://carl.outerlimits4x4.com/viewtopic.php?p=1109227#1109227
Top
Posts: 183
Joined: Wed Nov 12, 2003 4:52 pm
Location: Brisbane

Post by Tooheys »

left hand side of the bellhousing against the motor about half way up
If at first you dont succeed.......get a bigger HAMMER!!!
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 0 guests