Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Winch Motor Specs

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Forum rules
Post Reply
Posts: 1781
Joined: Mon May 17, 2004 10:01 pm
Location: Geelong

Winch Motor Specs

Post by beretta »

Hi all,

This might also be helpful to other forum members.....

I am after some tech specs on Winch motors, ideally I would like to check out the specs on a 6hp Warn motor if anyone has them I would be very appreciate of a copy to run my eye over. Also there is a 7.8hp motor out there I beleive, anyone know who makes these?

Any help is much appreciated!
:D
Cheers,

Beretts
Top
Posts: 56
Joined: Mon Aug 23, 2004 12:47 pm
Location: Auckland, NZ

Contact:
Contact Fourdogs

Post by Fourdogs »

7.8HP info here;
http://www.traxion.co.nz/product/spec/specSuperDuty.pdf
[url]http://www.project-tinfoil.co.nz[/url]
Top
Posts: 1781
Joined: Mon May 17, 2004 10:01 pm
Location: Geelong

Post by beretta »

Fourdogs, you're a bloody legend! Thanks heaps for posting that up for me.

Cheers, Beretts.
Top
Posts: 2832
Joined: Sat Oct 26, 2002 3:15 pm
Location: Ringwood East, VIC

Post by RoldIT »

Here are some prices quoted by Traxion back in May 06.

(If you're serious about ordering from them, I suggest getting a current price)


W7623 12volt 4.8hp Motor $ NZD 420.00

W7618 12volt 6.8hp Motor $ NZD 638.40

W7619 12volt 7.8hp Motor $ NZD 798.00
KRiS
Top
Posts: 1781
Joined: Mon May 17, 2004 10:01 pm
Location: Geelong

Post by beretta »

Thanks for that info Kris appreciate it! I am mainly sussing out the specs at the moment but prices will be very helpful in the near future.
Top
Posts: 382
Joined: Thu Jun 02, 2005 9:43 pm
Location: laying on your couch

Post by gqpete »

these motors been around for ages, do know people who have owned them but go back to warn 6hrs. bit quicker
lick my vinegary balls.
veeeeryniiiice
Top
Posts: 1781
Joined: Mon May 17, 2004 10:01 pm
Location: Geelong

Post by beretta »

gqpete wrote:these motors been around for ages, do know people who have owned them but go back to warn 6hrs. bit quicker
So Pete, they're powerful, but RPM wise the Warn is a faster motor? Do you know what RPM the 6hp Warn motor is rated at by any chance?
Top
Posts: 382
Joined: Thu Jun 02, 2005 9:43 pm
Location: laying on your couch

Post by gqpete »

no cause specs on 6hrs hard to find, but superduty 12v dont like being sped up with 24v . 24v 7.8 hrs are durable and reliable but 6hrs warn with 24v is faster .
lick my vinegary balls.
veeeeryniiiice
Top
Posts: 381
Joined: Wed Sep 22, 2004 4:18 pm
Location: northside bris.QLD

Post by tuf355 »

is the 6hp WARN running 24v faster underload than the 7.8hp 24v or when spooling out ect
thanks to~ ON & OFFROAD MECHANICAL , F.A.T BARS , ARB COOPERS PLAINS , WM MOTORSPORT , 2DEXTREME , DIRECT CLUTCHES & FOURBY`S
Top
Posts: 108
Joined: Sun Sep 26, 2004 8:50 pm

Post by ads80 »

the rpm on a series wound moter varies with load. so any specs given are usually useless.warn 6.5 holds rpm under load better than others ;)
80 series with chrome wheelnuts !!
Top
Posts: 542
Joined: Thu May 05, 2005 8:53 pm
Location: Lysterfield

Post by krimnl »

i have a 7.8hp 24v motor , it is very reliable but it is a little slow . one thing with it is that it doesnt slow down much under load
Top
Post Reply

Return to “General Tech”

Who is online

Users browsing this forum: No registered users and 4 guests