Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

89 HJ61 Sahara Sun Roof

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 1293
Joined: Mon Jul 18, 2005 10:58 am
Location: Location Location

89 HJ61 Sahara Sun Roof

Post by vSAHARAx »

Hey There

Wondering how do i go about pulling the Sun-Roof out of my cruiser, as she is getting a bit of rust and wanna fix it before it gets too bad?

Cheers
Troy
GXL HDJ80 Cruiser - Lifted, Locked, 315's, 3" Zorst, Safari Intercooled, High Flowed Turbo, All the fruit. AMMS tuned coal shovel, Pushing 148rwhp... + heaps of the black sooty goodness...
Top
Posts: 1293
Joined: Mon Jul 18, 2005 10:58 am
Location: Location Location

Post by vSAHARAx »

Any one?
GXL HDJ80 Cruiser - Lifted, Locked, 315's, 3" Zorst, Safari Intercooled, High Flowed Turbo, All the fruit. AMMS tuned coal shovel, Pushing 148rwhp... + heaps of the black sooty goodness...
Top
Posts: 207
Joined: Thu Jun 26, 2003 10:02 pm
Location: sydney

Post by turbo4t »

Hi mate, very easy, open it about 3 inches then pop the trim off and slide it (the trim) back into the cavity. Then you will see the 8 or so nuts holding the lid on. Just be carefull to count the shims in each corner so when you put it back in it seal up ok and sits straight. You may find more rust in the back of it once it's out. All the best...
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 3 guests