Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

magna 3.0l Auto ~~~ NF 3.l V6 Pajero

Tech Talk for Mitsubishi owners.

Moderator: -Scott-

Forum rules
Post Reply
Posts: 3
Joined: Fri Sep 15, 2006 6:24 pm
Location: Bright

magna 3.0l Auto ~~~ NF 3.l V6 Pajero

Post by pajero1988 »

I have a shot engine in my NF 1988 Pajero I have found a MITSUBISHI MAGNA 3.0 V6 ENGINE AND AUTO! This engine is a 6g72 the same as in my pajero. my question is! s the bell housing the same patten what trouble will I find if I try to nstall this engine in my car
Top
Posts: 179
Joined: Mon Feb 06, 2006 3:51 pm
Contact:
Contact Spimon_NH

Post by Spimon_NH »

I'm not 100% sure on this topic...
BUT I've read a few other posts that mention buying the Magna engine and swapping all the good bits (various pumps, dizzy etc..) is the cheap way out of a new Pajero engine, which would mean the bellhousing pattern is the same.
Top
Posts: 14
Joined: Fri Jan 06, 2006 6:27 pm
Location: the oaks nsw

Post by BALDYJOE327 »

yes u can use the magna motor but u will need to strip it down to a bear block and then reuse all your pajero parts sump,manifolds.
nj 3ltr bullbar,driving lights,hr towbar,bfg ta 31,am cb,ss exh snorkle
Top
Posts: 30
Joined: Wed Apr 06, 2005 10:55 am
Location: Venezuela, South America

Post by Alej Altuve »

Yes 100% sure, you have to use all the components to make it rear wheel drive, bellhousing is the same
Montero 98, Gen2, Leaf sprung, 5sp man, 3.0 lt 12 valve, 4.625 gears, 1.925 T-case, custom snorkel, custom bull bar, custom shackels, add a leaves, 2inch lift, CB radio, 32x11.50 Pirelli AT.
Top
Post Reply

Return to “Mitsubishi”

Who is online

Users browsing this forum: No registered users and 17 guests