Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

79 Series Ute - is the front end the same as a 80 or 100

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 667
Joined: Mon Oct 27, 2003 6:26 pm
Location: Redcliffe

79 Series Ute - is the front end the same as a 80 or 100

Post by Red Rover »

Is the front end diff housing different in it's own right, or is it the same as a 100 or 80

thanks in advance
Top
Posts: 2097
Joined: Tue Aug 12, 2003 6:50 pm
Location: wollongong

Post by dow50r »

Pretty sure they r different...the coil springs for instance are different size, id say overall length is also different. as would be swaybars etc.
Centre would be 4.3, cv's would be ???
Top
Posts: 701
Joined: Tue Feb 03, 2004 3:04 pm
Location: Melbourne

Post by 80UTE »

dow50r wrote:Pretty sure they r different...the coil springs for instance are different size, id say overall length is also different. as would be swaybars etc.
Centre would be 4.3, cv's would be ???
To add to what dow50r wrote,
Axle is 80mm narrower than 80/100 axle.
Shortside has the same C/V-inner axle as 80/100 DX
Axle is shorter on Long side by ~80 mm
Brakes hubs disc's etc the same as 100's
Diff centres are the same 4.3.1 on 1HZ and 4.1 on 1HDFTE engines

Wally
THERES ONLY ONE SUBSTITUTE FOR CUBES AND THATS MORE and if you want more inchs stroke it !!!!!!!!!!!
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 0 guests