One Peice Tail Shaft???

Website · Post by **LuxyBoy** » Mon Nov 27, 2006 6:53 pm

Ok i have searched and checked the bible to no avail

I am wanting to know which model Hilux/Surf/4Runner shaft will replace a 91' LN106

Post by **Roctoy** » Mon Nov 27, 2006 7:10 pm

i just went to the wreckers and got an LN130 surf shaft but it fitted perfect because i had dual cases. Measure what you need and take the tape measure to the wrackers with you and hope for the best.

Post by **toyrex** » Mon Nov 27, 2006 11:03 pm

None you will have to get one made unless you have dual transfer cases then as above

Website · Post by **LuxyBoy** » Tue Nov 28, 2006 1:54 pm

toyrex wrote:None you will have to get one made unless you have dual transfer cases then as above

Well i know someone that has it but can't remember what his was off so you are wrong there.

Post by **Tomolux** » Tue Nov 28, 2006 4:37 pm

i picked up one from a gen 1. 2" longer than two piece shaft, so it fits mine with ifs rears perfectly

Post by **batcho101** » Tue Nov 28, 2006 5:29 pm

have one fore sale at the moment pm me about it

Post by **toyrex** » Tue Nov 28, 2006 9:29 pm

The early gen 1 universal has less articulated flex than the universals in the later tailshafts

Post by **bubs** » Tue Nov 28, 2006 10:21 pm

the 4 gen hilux dual cab's some had single piece rear drive shafts

Post by **Tomolux** » Wed Nov 29, 2006 7:43 pm

and the gen 1 flanges are different, smaller, smaller bolts too

Outer Limits 4x4 Board

One Peice Tail Shaft???

One Peice Tail Shaft???

Who is online