Hello all.
just a quick question that im sure u guys can answer quickly..
my brothers feroza is starting to run a bit rough...
i pulled off this hose to find it full of a black oily substance.
1. Is that normal
2. what does this hose do.
Is this a sysmptom of a blown head gasket?
Thanx all for your time.
Adam
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Hey Guys.. newbie question
Moderator: Tiny
Fatz,
It looks like you have just removed the breather hose from the rocker cover to the throttle body, this will get oil thrown into it by the moving cam shaft and rockers, etc below it. They use this method to plumb a breather so there is no place any water can get into the block during a water crossing which as you would guess, could be terminal.
In short, that is natural to get oil into that hose from the splash of the engine. But not heaps of it.
If your brothers Roza is running rough, I would recommend checking the vacuum lines (if it has them), base idle, timing. Else try a major service, oil, all filters, belts, valve clearance, spark plugs and leads.
This gets me out of trouble most of the time but I tend to go over the top and check everything.
It looks like you have just removed the breather hose from the rocker cover to the throttle body, this will get oil thrown into it by the moving cam shaft and rockers, etc below it. They use this method to plumb a breather so there is no place any water can get into the block during a water crossing which as you would guess, could be terminal.
In short, that is natural to get oil into that hose from the splash of the engine. But not heaps of it.
If your brothers Roza is running rough, I would recommend checking the vacuum lines (if it has them), base idle, timing. Else try a major service, oil, all filters, belts, valve clearance, spark plugs and leads.
This gets me out of trouble most of the time but I tend to go over the top and check everything.
http://www.bushranger.com.au/
'84 F70 Rocky :)
'97 Paj GLS LWB - HEHE
RIP ... My Feroza II SXP
'84 F70 Rocky :)
'97 Paj GLS LWB - HEHE
RIP ... My Feroza II SXP
Oil in the breater is normal ( unfortunately ) it gets everywhere and if you have done a few hundred thousand KM then it can block ports etc etc.
If a HD has been neglected the cylinder head and cam get heavily coated in oil gunge.
So its normal to fing oil / blowby in the throttle body, intake manifold , pipes , hoses etc - but it can cause issues.
If a HD has been neglected the cylinder head and cam get heavily coated in oil gunge.
So its normal to fing oil / blowby in the throttle body, intake manifold , pipes , hoses etc - but it can cause issues.
Who is online
Users browsing this forum: No registered users and 0 guests