Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
engine wont start
engine wont start
Hey guys
so i just finished my 2in BL on my 91 sierra.
went to drive it to get the steering colum aligned. and it woudnt start.
its kicking over and dosent seem to be the battery.
it didnt have much fuel in it when i started workin on it. but i did have the petrol filler hose off for a few days. could of it all avoporated out ?
i put some new fuel in it and no kick at all ??
could of i snaped the accelarator cable and its closing the carby ?
do i need to prime the engine or something if i have fully ran out of fuel ?
any ideas would be good. Cheers
so i just finished my 2in BL on my 91 sierra.
went to drive it to get the steering colum aligned. and it woudnt start.
its kicking over and dosent seem to be the battery.
it didnt have much fuel in it when i started workin on it. but i did have the petrol filler hose off for a few days. could of it all avoporated out ?
i put some new fuel in it and no kick at all ??
could of i snaped the accelarator cable and its closing the carby ?
do i need to prime the engine or something if i have fully ran out of fuel ?
any ideas would be good. Cheers
Where to start, do the usual tests Fuel Spark Compression
1st See if you've got fuel at the carby by looking down the carby while
turning the throttle and see if you've got fuel going down the throat.
with the work you've done that's probably the problem,
you may just need to bring the fuel back up to the carby (or pour a little bit into the carby to give it some help)
2nd Check to see if your roter button is turning while your crankin it
3rd Check to see if you've got spark at one of your plugs
as far as compression goes i'd doubt thats the problem.
Cheers Pep
1st See if you've got fuel at the carby by looking down the carby while
turning the throttle and see if you've got fuel going down the throat.
with the work you've done that's probably the problem,
you may just need to bring the fuel back up to the carby (or pour a little bit into the carby to give it some help)
2nd Check to see if your roter button is turning while your crankin it
3rd Check to see if you've got spark at one of your plugs
as far as compression goes i'd doubt thats the problem.
Cheers Pep
No longer the BIG Man in a Little Car!!
Now in a GUII
Now in a GUII
I'd try using some engine start or fuel down the carby as it probably just needs some help priming it again. Also just have a check around the engine bay that no wires, hoses etc. have been pulled off when you lifted it to get the body blocks in.
[quote="4WD Stuff"]
I haven't quoted Grimbo because nobody takes him seriously :finger: :finger: :finger: :finger: [/quote]
I haven't quoted Grimbo because nobody takes him seriously :finger: :finger: :finger: :finger: [/quote]
One that got me one day was the small cables behind the dizzy and going to the coil, there should be two wires that i can think of. This is will stop the spark.
Nic
Nic
[url=http://www.outerlimits4x4.com/viewtopic.php?p=930942#930942&highlight=]Zook[/url]
U SUK Zook Built and Sold.
New rig is 97 80 DX. 2" list 33s
U SUK Zook Built and Sold.
New rig is 97 80 DX. 2" list 33s
Hmm.
The coil is mounted on to the firewall panel behind the enine. dizzy has all the leads coming out of it.
Take the aircleaner top off the carb. when cranking and pressing the acc pedal there should be fuel coming into the carb by looking down the throat.
Nic
The coil is mounted on to the firewall panel behind the enine. dizzy has all the leads coming out of it.
Take the aircleaner top off the carb. when cranking and pressing the acc pedal there should be fuel coming into the carb by looking down the throat.
Nic
[url=http://www.outerlimits4x4.com/viewtopic.php?p=930942#930942&highlight=]Zook[/url]
U SUK Zook Built and Sold.
New rig is 97 80 DX. 2" list 33s
U SUK Zook Built and Sold.
New rig is 97 80 DX. 2" list 33s
oh ok thanks man yea thats what i would of done.
i know a little about how engines work but mostly fiddled with rc plane ones and whipper snipper ones. like i know what most the parts do just dont know the names of specific parts. But thanks man
i would of looked in the carbie like that i just really havent looked around it yet.
Cheers
i know a little about how engines work but mostly fiddled with rc plane ones and whipper snipper ones. like i know what most the parts do just dont know the names of specific parts. But thanks man
i would of looked in the carbie like that i just really havent looked around it yet.
Cheers
No sparky no starty
Check behind the dizzy and coil for all cables are tight and present. Should be i beleive two cables running from dizzy and coil. + and -
Should be some earths behind the battery and between the dizzy and body. I am thinking you are missing more of a +'ve than a - as you are getting cranking but not starting. block is -'ve as cranking, cable is hooked up to block for this.
U getting fuel? and when the cap is off the dizzy is it turning round.
Nic

Check behind the dizzy and coil for all cables are tight and present. Should be i beleive two cables running from dizzy and coil. + and -
Should be some earths behind the battery and between the dizzy and body. I am thinking you are missing more of a +'ve than a - as you are getting cranking but not starting. block is -'ve as cranking, cable is hooked up to block for this.
U getting fuel? and when the cap is off the dizzy is it turning round.
Nic
[url=http://www.outerlimits4x4.com/viewtopic.php?p=930942#930942&highlight=]Zook[/url]
U SUK Zook Built and Sold.
New rig is 97 80 DX. 2" list 33s
U SUK Zook Built and Sold.
New rig is 97 80 DX. 2" list 33s
Who is online
Users browsing this forum: No registered users and 3 guests