Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

POST UP YOUR ROVERS

Tech Talk for Rover owners.

Moderator: Micka

Posts: 4
Joined: Mon Nov 27, 2006 9:58 am
Location: Gold Coast, Queensland

Post by Azza153 »

Ive got one **FOR SALE** with RWC $7499 nog.
Very tough and unstopable

It is a 83model rangie been coverted to fuel injection. It has a wolf 3D EMS. Comes with controller, so you can see all engine temps, fuel mixture, revs, intake temp, load, throttle pos, can controll thermos( two big fully shielded suckers), rev limiter, the list goes on........

3.5 ltr EFi rebuilt around 10k Kms ago.
35x12.5x15 BFGoodrich Mud Terrain tires front and full size spare is 70% tread and rears are new, 2nd spare tire is a normal profile goodyear tyre.
2 inch spring lift
2 inch body lift
All four gaurds have been professionally cut to make room for the tyres see pics
Rebuilt 3-speed Chrysler TorqueFlite Auto (extremely tough)
Every single suspension bush has been replaced less than 700 kms ago
brand new shocks less than 700 kms ago
brand new tierod ends less than 700 kms ago
ball joint seals transfer case seal and rear pinion seal replaced less than 700 kms ago
Air Con Compressor has been converted to air compressor with fill tank (hose with nito fittings supplied) located under the car which inflates the tyres quickly.
Bull bar and Bash plate
Spotlights
Tow Bar
Snorkel
Full size roof rack(one broken mount, easily fixable)
Spare Engine minus conrods, pistons and cams may be supplied with car depending on selling price
Spare Belts, Fuel Filter, Water Pump and Alternator
A couple of spare panels
6 MONTHS REGO
PRICE IS NEGOTIABLE

4 Wheel Disc Brakes

Bull Bar

Cd Player

Fuel Injection

Heavy Duty Suspension

Power Steering

Roof Racks

Tinted Windows

Tow Bar

Vehicle enquiry's: Aaron on Mob 0438796854
4 Wheel Disc Brakes

Bull Bar

Cd Player

Fuel Injection

Heavy Duty Suspension

Power Steering

Roof Racks

Tinted Windows

Tow Bar


Inquiry's Aaron On mob: 0438796854


I cant figure out how to put pictures on so if you wantg pictures i can either email you or you can click this link to see it on carsales where it is advertised.
http://www.carsales.com.au type in rego which if 419DXF
Posts: 144
Joined: Thu Feb 10, 2005 11:17 pm
Location: Gold Coast QLD

Camo's Rangie

Post by V8 Rangie »

This is my rangie
Before
Image
After a little bit of work
Image
Image
Image
Image
Image
Image
http://s150.photobucket.com/albums/s110 ... Rangie.flv
Last edited by V8 Rangie on Sat Feb 24, 2007 2:53 pm, edited 7 times in total.
1994 Range Rover Soft Dash, Rear ARB Locker, 33's, 2" body & Spring, custom bits
2004 Range Rover Diesel 20" wheels. My Black Beauty:-)
Posts: 113
Joined: Fri Jan 23, 2004 12:48 pm
Location: Gold Coast, Qld. Australia

Post by outlaw »

Okay here's one of mine... as purchased from TUFF110

Image

And now dual cabbed... soon to have new claws, winch bar and exo-cage :lol:

Image
Image
[b]EVL44[/b] '89 LR Perentie 110
[b]Phoenix[/b] '66 LR 2/3 Hybrid
[b][size=150][url=http://www.GCLRO.com/]Gold Coast Land Rover Owners[/url][/size][/b]
Posts: 5803
Joined: Wed Feb 19, 2003 3:02 pm
Location: Brisbane

Post by ISUZUROVER »

outlaw wrote:Okay here's one of mine... as purchased from TUFF110

Image

And now dual cabbed... soon to have new claws, winch bar and exo-cage :lol:

Image
Image
Did Glen do that? - looks good.
_____________________________________________________________
RUFF wrote:Beally STFU Your becoming a real PITA.
User avatar
DK
Posts: 527
Joined: Fri Oct 20, 2006 6:00 pm
Location: Melbourne

Post by DK »

Hey Outlaw that looks awesome,...Any idea on what Drew bought as a replacement?
Posts: 1767
Joined: Wed Jun 04, 2003 9:30 am
Location: Just Near Fraser Island

Re: Camo's Rangie

Post by Maggot4x4 »

V8 Rangie wrote:This is my rangie
Before
Image
After a little bit of work
Image
Image
Image
Image
Image
Image
Looking sweet. How are the nissan diffs going?
[quote="Wooders"]If ya want a 4x4 camry go ahead & buy a Patrol or Cruiser.[/quote]Rangie with 80s LC diffs, Isuzu 4bd1, Twin ARB lockers, 8000lb Hi mount warn, 315x75x16 Procomp XTerrains
Posts: 144
Joined: Thu Feb 10, 2005 11:17 pm
Location: Gold Coast QLD

Post by V8 Rangie »

Yeah they are going great. Really need to put a set of ARB lockers on soon though. Just about to get a double cardon shaft made for the rear to get rid of little viabration.

Camo
1994 Range Rover Soft Dash, Rear ARB Locker, 33's, 2" body & Spring, custom bits
2004 Range Rover Diesel 20" wheels. My Black Beauty:-)
Posts: 1097
Joined: Wed Feb 16, 2005 5:07 pm
Location: brisvagas

drew

Post by def90 »

drew bought a extra cab TD5 130
Posts: 1767
Joined: Wed Jun 04, 2003 9:30 am
Location: Just Near Fraser Island

Post by Maggot4x4 »

V8 Rangie wrote: Just about to get a double cardon shaft made for the rear to get rid of little viabration.

Camo
Hence the toy diffs in mine
[quote="Wooders"]If ya want a 4x4 camry go ahead & buy a Patrol or Cruiser.[/quote]Rangie with 80s LC diffs, Isuzu 4bd1, Twin ARB lockers, 8000lb Hi mount warn, 315x75x16 Procomp XTerrains
Posts: 144
Joined: Thu Feb 10, 2005 11:17 pm
Location: Gold Coast QLD

Post by V8 Rangie »

eh easy fix. Will need the stonger nissan diffs when next engine is fitted. Great not having to worry about breaking em like the rover ones.
1994 Range Rover Soft Dash, Rear ARB Locker, 33's, 2" body & Spring, custom bits
2004 Range Rover Diesel 20" wheels. My Black Beauty:-)
Posts: 5803
Joined: Wed Feb 19, 2003 3:02 pm
Location: Brisbane

Post by ISUZUROVER »

Maggot4x4 wrote:
V8 Rangie wrote: Just about to get a double cardon shaft made for the rear to get rid of little viabration.

Camo
Hence the toy diffs in mine
Ash - I have lost track - do you still have 2 rangies or just one now?

I think a 35-spline salisbury rear and an 80-series front would be a good combo - if I can find a way to do it without having to carry 2 different spares (or using too many one-off parts)...
_____________________________________________________________
RUFF wrote:Beally STFU Your becoming a real PITA.
Posts: 113
Joined: Fri Jan 23, 2004 12:48 pm
Location: Gold Coast, Qld. Australia

Post by outlaw »

Yep Glen did the conversion and still working on my front bar. And as mentioned Drew bought a D130
[b]EVL44[/b] '89 LR Perentie 110
[b]Phoenix[/b] '66 LR 2/3 Hybrid
[b][size=150][url=http://www.GCLRO.com/]Gold Coast Land Rover Owners[/url][/size][/b]
Posts: 1767
Joined: Wed Jun 04, 2003 9:30 am
Location: Just Near Fraser Island

Post by Maggot4x4 »

ISUZUROVER wrote:
Maggot4x4 wrote:
V8 Rangie wrote: Just about to get a double cardon shaft made for the rear to get rid of little viabration.

Camo
Hence the toy diffs in mine
Ash - I have lost track - do you still have 2 rangies or just one now?

I think a 35-spline salisbury rear and an 80-series front would be a good combo - if I can find a way to do it without having to carry 2 different spares (or using too many one-off parts)...
G'Day Ben,

No I still have 2, the dark blue one with the 4BD1 in it and the toy diffs, and the light blue one with the 350 chev and one day nissan diffs..

As far as the toy and sals, I would go gq front and sals for ease of conversion, and just make up 1" spacers for one of the hubs with the right PCD for the other wheels. The you could choose to run them all the time or just when you had a flat on the wrong axle
[quote="Wooders"]If ya want a 4x4 camry go ahead & buy a Patrol or Cruiser.[/quote]Rangie with 80s LC diffs, Isuzu 4bd1, Twin ARB lockers, 8000lb Hi mount warn, 315x75x16 Procomp XTerrains
Posts: 54
Joined: Sun Nov 26, 2006 11:37 am
Location: Stockton NSW

Post by paulio1 »

Gotta love the rangies :lol:

My tray-back running 35" Maxxis crawlers
Image
Posts: 64
Joined: Sat Dec 02, 2006 4:39 am
Location: west wales

Post by RedlineMike »

Just a newbie on here,

Situated in scotland in the Uk so its a bit differant to what you guys get to play on,

It now has a FMIC,opened up injection pump,i run 265/75/16 Insa turbo special traks (simex copys in a 33/10.50/16 size)
Has a warn 12k lowmount up front with synthetic winch rope,soon to be replaced by a warn 8274 high mount to be powered by an Xp motor,Just in the process of buying a ARb rear locker & a pair of lightforce spots to replace the hella 3000's thats on it


Some pics of my 90
Image
Image
Image
First time out with the new tyres on

Image

Image
Just been painted

Image
*more smoke-more poke!
[u]Was[/u] 200Tdi Dyno'ed 120Bhp & 180Ibft
[u]Now[/u] TD5 mapped with vnt & lots of black smoke 220bhp+ & 320Ibft+

roof, doors,panels,paint its just how i roll
Posts: 691
Joined: Thu Dec 26, 2002 11:21 pm
Location: Lebanon

Post by DiscoDino »

Its been a while, so here's the latest on my truck...

Image

Image

Image
LR Disco truggy:
42" Iroks, ZF, dual cases & ARBs, 30 splined, Longfielded, OMEs, Optimas, M8274-50s, Rockstomper rope & Bead-L
LR D-90 TD5 ST:
33" BFT AT, tuned, caged, 1/2 top
Posts: 113
Joined: Fri Jan 23, 2004 12:48 pm
Location: Gold Coast, Qld. Australia

Post by outlaw »

RedlineMike wrote: Image
I can't tell from the pic but where's the top of the snorkel go to :D
[b]EVL44[/b] '89 LR Perentie 110
[b]Phoenix[/b] '66 LR 2/3 Hybrid
[b][size=150][url=http://www.GCLRO.com/]Gold Coast Land Rover Owners[/url][/size][/b]
Posts: 64
Joined: Sat Dec 02, 2006 4:39 am
Location: west wales

Post by RedlineMike »

outlaw wrote:
RedlineMike wrote: Image
I can't tell from the pic but where's the top of the snorkel go to :D
It goes up behind the end light & lives under a biscuit box lid for shelter from rain & mud :lol: :lol:
*more smoke-more poke!
[u]Was[/u] 200Tdi Dyno'ed 120Bhp & 180Ibft
[u]Now[/u] TD5 mapped with vnt & lots of black smoke 220bhp+ & 320Ibft+

roof, doors,panels,paint its just how i roll
Posts: 5803
Joined: Wed Feb 19, 2003 3:02 pm
Location: Brisbane

Post by ISUZUROVER »

outlaw wrote:Yep Glen did the conversion and still working on my front bar. And as mentioned Drew bought a D130
Any pics of the rear bar? Is it just angle steel?
Maggot4x4 wrote:
No I still have 2, the dark blue one with the 4BD1 in it and the toy diffs, and the light blue one with the 350 chev and one day nissan diffs..

As far as the toy and sals, I would go gq front and sals for ease of conversion, and just make up 1" spacers for one of the hubs with the right PCD for the other wheels. The you could choose to run them all the time or just when you had a flat on the wrong axle
Sounds like a good idea...
_____________________________________________________________
RUFF wrote:Beally STFU Your becoming a real PITA.
Posts: 113
Joined: Fri Jan 23, 2004 12:48 pm
Location: Gold Coast, Qld. Australia

Post by outlaw »

Yep just angled steel Drew had previously done... seems solid enough though so haven't bothered having another made... will take a couple pics tonight.
[b]EVL44[/b] '89 LR Perentie 110
[b]Phoenix[/b] '66 LR 2/3 Hybrid
[b][size=150][url=http://www.GCLRO.com/]Gold Coast Land Rover Owners[/url][/size][/b]
Posts: 101
Joined: Mon Dec 04, 2006 10:49 pm
Location: Gold Coast

Post by Petes »

Few pics of my 2001 td5 90 as it is and over the recent work. I am based in the cotswolds in England but my Girlfriend is from the Gold Coast.

Front and rear ARB's, 8274 on D44 hi mount bumper, rear 9.5xp, OME LTR dampers, 33" BFG MT's, etc etc...

Currently building another one using disco 2 axles and a 90 chassis etc..

Image

Image

Image

Image

Image

Image

Image
Posts: 64
Joined: Sat Dec 02, 2006 4:39 am
Location: west wales

Post by RedlineMike »

Petes wrote:Few pics of my 2001 td5 90 as it is and over the recent work. I am based in the cotswolds in England but my Girlfriend is from the Gold Coast.

Front and rear ARB's, 8274 on D44 hi mount bumper, rear 9.5xp, OME LTR dampers, 33" BFG MT's, etc etc...

Currently building another one using disco 2 axles and a 90 chassis etc..

Image

Image

Image

Image

Image

Image

Image
Any o those pics from wheels in the woods with SORC?
*more smoke-more poke!
[u]Was[/u] 200Tdi Dyno'ed 120Bhp & 180Ibft
[u]Now[/u] TD5 mapped with vnt & lots of black smoke 220bhp+ & 320Ibft+

roof, doors,panels,paint its just how i roll
Posts: 101
Joined: Mon Dec 04, 2006 10:49 pm
Location: Gold Coast

Post by Petes »

Mike,

Yes they were. It was a very good day.

Pete
Posts: 64
Joined: Sat Dec 02, 2006 4:39 am
Location: west wales

Post by RedlineMike »

Did you do the black route down the mudrun?

had to winch the last 100ft downhill to get back to the road

Image

Image

are you doing WitW next year?

More pics here: http://www.scottishoffroadclub.co.uk/cp ... =25&page=1
*more smoke-more poke!
[u]Was[/u] 200Tdi Dyno'ed 120Bhp & 180Ibft
[u]Now[/u] TD5 mapped with vnt & lots of black smoke 220bhp+ & 320Ibft+

roof, doors,panels,paint its just how i roll
Posts: 101
Joined: Mon Dec 04, 2006 10:49 pm
Location: Gold Coast

Post by Petes »

RedlineMike wrote:Did you do the black route down the mudrun?

had to winch the last 100ft downhill to get back to the road

are you doing WitW next year?

More pics here: http://www.scottishoffroadclub.co.uk/cp ... =25&page=1
Hi Mike,

I didnt do that very muddy one. I did quite a few of the blacks but I was slightly wary that I had a 300+ mile drive home and needed to go to work the next morning in it! I was there with my girlfreind for a nice weekend as opposed to a risk my car on an event weekend!, so I did avoid a few.
(coward hey!!)
I will be there next year. I thought it was really good. I may be in a more extreme 90 (current project) tho as I am considering selling the blue one.

you going again?

Pete
Posts: 64
Joined: Sat Dec 02, 2006 4:39 am
Location: west wales

Post by RedlineMike »

ill be going again,by the end of the day i was knackered & needing a set of solenoids for the winch as they had melted again,got some funny looks when i turned up to work on the monday with it covered from top 2 bottom in mud,

still got mud in the dash just now thinking about it,was a great idea at the start of the day to take the door tops off but after that it was as muddy inside as outside :lol: :lol:
*more smoke-more poke!
[u]Was[/u] 200Tdi Dyno'ed 120Bhp & 180Ibft
[u]Now[/u] TD5 mapped with vnt & lots of black smoke 220bhp+ & 320Ibft+

roof, doors,panels,paint its just how i roll
Posts: 1767
Joined: Wed Jun 04, 2003 9:30 am
Location: Just Near Fraser Island

Post by Maggot4x4 »

Thought I'd post a recent photo of it finished.

Image
[quote="Wooders"]If ya want a 4x4 camry go ahead & buy a Patrol or Cruiser.[/quote]Rangie with 80s LC diffs, Isuzu 4bd1, Twin ARB lockers, 8000lb Hi mount warn, 315x75x16 Procomp XTerrains
Posts: 64
Joined: Sat Dec 02, 2006 4:39 am
Location: west wales

Post by RedlineMike »

RedlineMike wrote:Just a newbie on here,

Situated in scotland in the Uk so its a bit differant to what you guys get to play on,

It now has a FMIC,opened up injection pump,i run 265/75/16 Insa turbo special traks (simex copys in a 33/10.50/16 size)
Has a warn 12k lowmount up front with synthetic winch rope,soon to be replaced by a warn 8274 high mount to be powered by an Xp motor,Just in the process of buying a ARb rear locker & a pair of lightforce spots to replace the hella 3000's thats on it


Some pics of my 90
Image
Image
Image
First time out with the new tyres on
Image
just found an old pic the day i bought it :lol: http://forums.mud-club.com/download.php?id=2505
*more smoke-more poke!
[u]Was[/u] 200Tdi Dyno'ed 120Bhp & 180Ibft
[u]Now[/u] TD5 mapped with vnt & lots of black smoke 220bhp+ & 320Ibft+

roof, doors,panels,paint its just how i roll
Posts: 234
Joined: Fri Jan 27, 2006 11:12 am
Location: NZ

Post by Turoa »

.
Last edited by Turoa on Thu Jun 23, 2011 8:25 pm, edited 1 time in total.
Posts: 216
Joined: Sat Jan 15, 2005 9:29 pm
Location: Dandenong Ranges

Post by schuler »

My project, it has taken a while, but not much left to do, thanks to all who have replied to my questions, this is my first Rover!

Back from the paint shop

Image

Image

Image

Image

Image
86 Rangie, F+R 4:11 Maxi, 35 Pedes, 6 point cage, Comp High Mount
Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest