Front bar for bundera options???

[bundyboy]

hey, what is available for the bundera in way of front bars?

willing to consider full bar or neat little nudge bar, does not need winch capabilities but interested to if they do.

the ARB man says they dont do much at all. I have seen a tjm bumber but no nudge part thingy.

[dumbdunce]

that's funny! I have an ARB highmount winch bar on my bundy. I am pretty sure the rail spacing/profile is the same as 70/75 series so I think the 7x series bars should fit.

scaling off the frame diagrams in the Max Ellery's 'cruiser manuals, the rail spacing is the same for 70, 73, 75, and Bundera. the only issue there might be is with the front fenders on the bundy which hang down in front a lot further than the full-size 7x series fenders - but then the Bundy frame rails stick a lot further out the front so maybe not an issue. hrm also maybe the 'big' 70 series have taller frame rails, I don't have one here to measure though. even if they are, you could still fit the 7x series bar and pack the difference or modify the bar mounting boxes to fit.

cheers

Brian

[bundyboy]

thanks, i think the guy at ARB was spilling s__t coz he told me it was all different due to the coil springs.

i will check my landcruiser manual today too.