Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Get out your tape measures

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Forum rules
Post Reply
Posts: 266
Joined: Sun Jul 13, 2003 7:56 pm
Location: Gold Coast

Contact:
Contact Bazooka

Get out your tape measures

Post by Bazooka »

Hi guys,

Im looking for some control arms to build a suspension setup and need something in the vacinity of 680mm long eye to eye. I was thinking that some of the Nissans might have trailing arms around this length. Can anyone confirm the length of their control arms?

Cheers
Top
Posts: 4275
Joined: Thu Dec 19, 2002 2:12 pm
Location: Sydney

Post by ozy1 »

GQ/GU lower rear control arms are 677 centre to centre, hope this helps,.
Top
Posts: 266
Joined: Sun Jul 13, 2003 7:56 pm
Location: Gold Coast

Contact:
Contact Bazooka

Post by Bazooka »

Thanks heaps Ozy i dont think i could find a better match than that. Ill look into it.
Top
Posts: 1047
Joined: Sun Nov 19, 2006 2:27 pm
Location: Wollongong

re: GQ arms

Post by Nelso »

Standard GQ/GU lower rear arms are offset a couple of degrees as the mount on the diff is wider than the mount on the chassis. Just in case you're going to use standard ones.
What's the difference between ignorance and apathy? I don't know and I don't care.

I am an insomniac dyslexic agnostic. I often lay awake all night wondering if there really is a Dog.
Top
Post Reply

Return to “Nissan”

Who is online

Users browsing this forum: No registered users and 2 guests