Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Aussie Locker

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Post Reply
Posts: 1575
Joined: Mon Oct 21, 2002 1:17 pm

Aussie Locker

Post by Singo17 »

Anyone know if it is sold here and if so what Brand name as I doubt we would get off on the Ozzy locka bit. TA
Official member of the Babinda Jimmy James Beam III Fan Club

Darth Bobo Honker Hunter Inc, for the up gunned Poodlefaker.

:armsup:"ARMS UP":armsup:
Posts: 231
Joined: Wed Apr 16, 2003 9:48 am
Location: Melbourne

Post by Andrew_C »

Posts: 11892
Joined: Tue Oct 22, 2002 9:53 am
Location: Melbourne

Post by N*A*M »

still looks like a 4wd systems lokka to me
Posts: 1575
Joined: Mon Oct 21, 2002 1:17 pm

Post by Singo17 »



Well that was two months ago any updates?

POR has tested them limited an like em by the by.
Official member of the Babinda Jimmy James Beam III Fan Club

Darth Bobo Honker Hunter Inc, for the up gunned Poodlefaker.

:armsup:"ARMS UP":armsup:
Posts: 6021
Joined: Sat Feb 15, 2003 11:01 pm
Location: Shed.

Post by dumbdunce »

pretty sure it's just a 4WD systems 'Lokka', with 'Aussie' Branding to make it appeal to the US market.

save up for an air locker. it's worth the extra.
Posts: 295
Joined: Thu Jan 16, 2003 8:05 pm
Location: Brisbane, Southside

Post by Punchy »

Which is a shame as it indicates that we make shit
45 series ute - 308 -gas -35's- lifted -no flex..But i got air lockers !

2006 VX v8 4.7 Landcruiser, bog stock. It's black so its cool !
Posts: 6021
Joined: Sat Feb 15, 2003 11:01 pm
Location: Shed.

Post by dumbdunce »

I don't think they're made here. as long as air lockers are associated with Australia I don't think we've got too much to worry about.


that said, I've spoke to people with 'Lokka' diff locks are they reckon they're ace. bang for buck they're hard to go past.
Posts: 1837
Joined: Sat Nov 09, 2002 10:49 am
Location: Brisbane

Post by beebee »

dumbdunce wrote:I don't think they're made here. as long as air lockers are associated with Australia I don't think we've got too much to worry about.


that said, I've spoke to people with 'Lokka' diff locks are they reckon they're ace. bang for buck they're hard to go past.


Great "bang for your buck" - mine only took 3 days to go bang with street only use. If you're looking for a bang - I highly recommend their product.
TEAM DGR WEBSITE
TEAM DGR ON FACEBOOK

Sponsors:
SUPERIOR ENGINEERING
LOCKTUP 4X4
UNIVERSAL DRIVESHAFTS QUEENSLAND
MASSOJET UNDER BODY BUDDY
DIRTCOMP
4WD TV
Posts: 6021
Joined: Sat Feb 15, 2003 11:01 pm
Location: Shed.

Post by dumbdunce »

how did it fail?

warranty?
Posts: 295
Joined: Thu Jan 16, 2003 8:05 pm
Location: Brisbane, Southside

Post by Punchy »

we know how it failed...

moreso the question...why did it fail !

damn thing was just pushing a set of 31 10rs on chrome gxl rims on an empty hilux tray back...

hehehe
Bang for buck...heheheh

i heard the thing operating in the back of his truck...and as you turned the corner louder that life cracking and clacking sounds emmitted from the rear diff of the truck..

faulty design and production is why it failed..


enter small print
"I would like to think it was NOT the person who assembled the diff center as he is one of our more respected retail 4x4 component outlet retailers and i assume has had plenty of practice installing these in the past
45 series ute - 308 -gas -35's- lifted -no flex..But i got air lockers !

2006 VX v8 4.7 Landcruiser, bog stock. It's black so its cool !
Posts: 1837
Joined: Sat Nov 09, 2002 10:49 am
Location: Brisbane

Post by beebee »

Punchy wrote:we know how it failed...

moreso the question...why did it fail !

damn thing was just pushing a set of 31 10rs on chrome gxl rims on an empty hilux tray back...

hehehe
Bang for buck...heheheh

i heard the thing operating in the back of his truck...and as you turned the corner louder that life cracking and clacking sounds emmitted from the rear diff of the truck..

faulty design and production is why it failed..


enter small print
"I would like to think it was NOT the person who assembled the diff center as he is one of our more respected retail 4x4 component outlet retailers and i assume has had plenty of practice installing these in the past


In response to your small print......
I also would like to rule out this option but as that is not possible, I rely on the fact that he has fitted heaps of diff locks. Add to the fact that the "lokka" are dead easy to install, I rest assured that it was installed correctly. I doesn't really bother me as I never paid for the thing and my only loss was the time involved.

There must have been a manufacturing fault as it only lasted such a short amount of time and I purposely drove carefully as I was hesitant to push it after hearing of so many other breakages. The possible cause was a broken cross shaft in the diff carrier. After pulling the diff, it was obviously broken but it may have been fractured before installation as it was 2nd hand. If this had broken, then it would have caused major misalignment issues thus causing the lokka breakage. Hard to tell what happend first - chicken or egg?

The last diff that I broke appears to be directly caused by incorrect setup. Last time I take it to a diff and gearbox "specialist" :roll:
TEAM DGR WEBSITE
TEAM DGR ON FACEBOOK

Sponsors:
SUPERIOR ENGINEERING
LOCKTUP 4X4
UNIVERSAL DRIVESHAFTS QUEENSLAND
MASSOJET UNDER BODY BUDDY
DIRTCOMP
4WD TV
Posts: 1575
Joined: Mon Oct 21, 2002 1:17 pm

Post by Singo17 »

Beebee did you say the Locka was second hand
Official member of the Babinda Jimmy James Beam III Fan Club

Darth Bobo Honker Hunter Inc, for the up gunned Poodlefaker.

:armsup:"ARMS UP":armsup:
Posts: 49
Joined: Fri May 23, 2003 7:58 pm

Post by Leithfield »

Sorry to hear of your Lokka grief Beebee.

For the past 16 months I have run dual Lokka's in a Supra repowered Lux running 5.29's and 35" ET's over all manner of extreme terrain, and they have and continue to operate like clockwork.

Have a mate who is also Lokka equipped, who really pushes the edge of the envelope, and despite breaking pretty much everything else, his Lokka's take a licking and keep on clicking.

While I cant explain your Lokka failure, but question its history as a 2nd hand unit, based upon my own experience I can unreservedly recommend them.
Posts: 8
Joined: Fri Sep 05, 2003 12:44 pm
Location: Utah USA

Post by Killeraxle »

I hate those lunch box lockers.
ARB is our competition here in the US (we are building air operated lockers too) but before you spend money for that Aussie locker , save your money for an ARB ! Those lockrights easy lockers or whatever they name it , is junk ! you will break the stock carrier or crosspin . they are also loud and never realy work.
I would be pissed with the Aussie locker name when I would be an Australian ! They try to sell a bad product with a good name .
Posts: 511
Joined: Thu Oct 31, 2002 8:59 am
Location: Sydney

Post by Liam »

Lockright good
Locka Bad
mmmkay?
www.bbmotorsports.com.au
Posts: 1837
Joined: Sat Nov 09, 2002 10:49 am
Location: Brisbane

Post by beebee »

Lokka was brand new. The carrier, gears and cross shaft were second hand. It started making deep clunking noises from the moment I left the driveway. I had the option of replacing it with another for no extra $$ but I elected to wait until I can afford a locker that I feel I can trust. Good to hear that they are working for others as you can't go past the price.
TEAM DGR WEBSITE
TEAM DGR ON FACEBOOK

Sponsors:
SUPERIOR ENGINEERING
LOCKTUP 4X4
UNIVERSAL DRIVESHAFTS QUEENSLAND
MASSOJET UNDER BODY BUDDY
DIRTCOMP
4WD TV
Posts: 6021
Joined: Sat Feb 15, 2003 11:01 pm
Location: Shed.

Post by dumbdunce »

Both Lokka and Lockright can perform well when set up correctly. there are guys who despite having fitted a dozen or a hundred of these things fail (forget, don't know, don't care) to check the clearance between the side 'gears' (for want of a better name) and the clearance is critical. if they're set up eith correct clearance, they work. you can tell if the clearance is wrong because they clack and pop loudly in conrners, all the time. properly set up, around corners (assuming you take it gently, like you should drive in corners), all you hear is 'tick, tick, tick' as the clutches slide past each other.

usually the side gear shims in the diff are close enough, but sometimes they are not. this happened to the first lockright I installed and it was a disaster, it was rough and nasty and uncontrollable. a little research, and reinstalled with coorected shimming, it was hard to tell the thing had an auto locker in there at all.

this does not discount the possibility that in this individual case there may have been manufacturing faults with the locker hardware, or spider shaft, or both!

cheers

Brian
Posts: 408
Joined: Fri Nov 08, 2002 8:09 am
Location: Mainland, NZ

Post by suprasurf »

I remember a recent locker survey where it seemed the ARB appeared more times with problems than any other locker ??

That aside ;)

I have run Lockrite/Lokka's for over 3 years and never had one fail. I would agree that for a competition truck the ARB is probably the way to go but in my case as a trail toy only, the option was 1 ARB or 2 Lockrites !!

Also having watched 2 NZ winch competitions I was amazed at the number of times the ARB was forgotten in the heat of battle :cool:
www.4wd.net.nz
Posts: 2910
Joined: Thu Jan 02, 2003 4:32 pm
Location: Brisbane

Post by -Mick- »

I remember a recent locker survey where it seemed the ARB appeared more times with problems than any other locker ??


Primarily accessories though wasn't it. Grimace connectors and bodgey depressors (compressors ;) )
Posts: 714
Joined: Sun Aug 17, 2003 8:58 pm
Location: Cairns, (capital of Nth QLD)

Post by Kev80 »

Killeraxle wrote:I would be pissed with the Aussie locker name when I would be an Australian !


I noticed you said "when", ya going to swap sides ? ;)
GXL Turbo Diesel 80 series- 6" King springs + Rancho in-cab kit- 35" BFG Muds Twin ARB airlockers.
Post Reply

Who is online

Users browsing this forum: No registered users and 0 guests