Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Length of panhard in 2" spring lift in GQ???

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Forum rules
Post Reply
Posts: 54
Joined: Mon Apr 19, 2004 8:57 pm
Location: St.Andrews, Melbourne, Vic

Length of panhard in 2" spring lift in GQ???

Post by huntn »

Hi guys, i was wondering if someone can help me. I need someone with a 2" suspension lift with adjustable panhard rods, can u please measure the length of your front and rear panhard rods adjusted to the right position, go from centre of the bolt to centre of the bolt. Also can u please tell me the length of your steering arm, from centre of bolt to centre of bolt. Thank u very much. Cheers.
Top
Posts: 54
Joined: Mon Apr 19, 2004 8:57 pm
Location: St.Andrews, Melbourne, Vic

Post by huntn »

Come on someone must have some measurements for Me, am in need of them so i can shorten my panhard rods??
Top
Posts: 88
Joined: Thu Nov 02, 2006 8:26 am
Location: Brisbane

Post by AussieGQ »

I'm not 100% sure of this, but I dont think you need to make any adjustments to the panhard rods with just a 2 inch lift.
And I dont think you would be wanting to shorten them at all :?
Shane

91 LWB GQ TD42, Recaro Seats, Tait T2020 UHF, Tait TM8255 Trunk, 3" Lift and 33's. Turbo coming soon :D
Top
Posts: 1453
Joined: Tue Jul 12, 2005 10:13 pm
Location: Melbourne, Victoria

Post by wrksux »

ill get the old tape mesure out mate. you need the length of the rod or from end to end including the sleve that holds the bushes.
It's simple: questions are inherently good. Your questions... not so much

2003 GUIII turbo intercooled 4.2 DX
Top
Posts: 412
Joined: Fri Jul 14, 2006 6:03 pm
Location: brisbane

Post by rvh96 »

yeah 2 inch doesnt need any adjustment and if it did you would have to lenghten the rods not shorten
'05 GU Patrol coil cab ST
6" lift
Tough dogs
Snake Racing drop arms
3rds Rear Arms
Twin ARB air lockers
37" trepadors
ARB bullbar
WARN winch
High flow turbo
3" mandrel bent exhaust
Top
Posts: 1453
Joined: Tue Jul 12, 2005 10:13 pm
Location: Melbourne, Victoria

Post by wrksux »

he is droping from a 6" lift to a 2" so needs to either grab some OE ones or shorten his current ones, you got a PM mate with mesurements
It's simple: questions are inherently good. Your questions... not so much

2003 GUIII turbo intercooled 4.2 DX
Top
Posts: 54
Joined: Mon Apr 19, 2004 8:57 pm
Location: St.Andrews, Melbourne, Vic

Post by huntn »

Yeah thanks wrx, as you said I'm dropping from 6" to 2", so the rods are modified for 6" and i need to shorten them back to fit a 2" lift and just wanted to know the measurements from the centre of the bolt to the centre of the bolt, even of a standard length panhard would be good. Also i wanted to know if the steering arm needs to be shortened, looks like its also be lengthened. Thanks.
Top
Post Reply

Return to “Nissan”

Who is online

Users browsing this forum: No registered users and 1 guest