Im replacing my waterpump due to a leak from what appears to be the shaft.
Is Loctite 515 suitable for use on a waterpump and also the thermostat housing? Coz I can get this for nothing.
Or will it be to difficult to remove (if need be) in the future?
Anything else more suitable for this application?
Rod
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Loctite 515
Moderators: toaddog, TWISTY, V8Patrol, Moderators
Loctite 515
Dont expect mere proof to sway my opinion.
Used it last night to put the rocker cover back on me bike, I wouldn't use it for a water pump though unless as said before both surfaces are true and flat, I would probly use Ultra Blue anyways
When the Boogy Man goes to sleep.... he checks his Cupboard for chuck norris
Chuck Norris doesn't go Hunting, because hunting can mean failure or success..... Chuck Norris go's Killing
Chuck Norris doesn't go Hunting, because hunting can mean failure or success..... Chuck Norris go's Killing
Who is online
Users browsing this forum: No registered users and 84 guests