Notice: We request that you don't just set up a new account at this time if you are a previous user. If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
ausyota wrote:Not sure.
A few of the Coventrys stores in Perth have shifted their focus to the retail side of things with bigger showrooms etc and this was one of the specials.
I got the same price when I rang the Bunbury store.
But yeah not sure if WA only or not.
Paul.
Cheers. My local is only a "trade" style outlet still but I'll do the ring around tomorrow.
I've one of the twin pumps as well as the single "Dr Air" pump and they both work grouse, the twin will pump up 1 1/2 x 36" pedes to 1 x 36" pede of the single pump.
But hears a twist , I have a Mega Grunt single motor pump as well and it pegs the twin pump right up to the forth tire then the thermal cut out goes off.
It's quick to air up when all 3 are on the go though .
Cheers
Andrew
----------------------
Just a few mods, nothing over the top.:)
ausyota wrote:Not sure.
A few of the Coventrys stores in Perth have shifted their focus to the retail side of things with bigger showrooms etc and this was one of the specials.
I got the same price when I rang the Bunbury store.
But yeah not sure if WA only or not.
Paul.
Cheers. My local is only a "trade" style outlet still but I'll do the ring around tomorrow.
ausyota wrote:Not sure.
A few of the Coventrys stores in Perth have shifted their focus to the retail side of things with bigger showrooms etc and this was one of the specials.
I got the same price when I rang the Bunbury store.
But yeah not sure if WA only or not.
Paul.
Cheers. My local is only a "trade" style outlet still but I'll do the ring around tomorrow.
Let us know what you find out
x2
also anyone got photos and specs on these units?? EG size etc
I've got a Project Cyclone that I've had for about 18 months. It was only a cheapie ($79) so it's a little slow. The thermal cutout played up so I removed it and I've had no problems since. It's been relegated to back up duties after I got a Blue Tongue cheap off eBay.