Hi
How could I know if the diff`s ratio is 4.88 or 5.29. I have a montero 2.5 TDI, with 4D56 engine? I`ve got 30x9.50 R15 tyres and I´d like to put bigger ones, 31 or 32".
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Diffs ratio
Moderator: -Scott-
Tom, how many revs does it pull at 100km/hr ?? I think it will pull about 3700rpm with standard size tires at 100km/hr with 5.29's or about 3300rpm with 4.88's.
Check for stickers on the front and or rear diffs which will show the ratio but they may have worn off by now.
Check with your local Mitsu dealer and give him the VIN no and he should be able to tell you the crownwheel & pinion part no's and or the ratio. If he can only tell you the part no's give them to me and I can find out.
Failing that remove the front diff cover and physically count the teeth on the crownwheel & pinion to work out the ratio.
37/8 = 4.625:1, 39/8 = 4.875:1, 37/7 = 5.285:1.
Frank.
Check for stickers on the front and or rear diffs which will show the ratio but they may have worn off by now.
Check with your local Mitsu dealer and give him the VIN no and he should be able to tell you the crownwheel & pinion part no's and or the ratio. If he can only tell you the part no's give them to me and I can find out.
Failing that remove the front diff cover and physically count the teeth on the crownwheel & pinion to work out the ratio.
37/8 = 4.625:1, 39/8 = 4.875:1, 37/7 = 5.285:1.
Frank.
I just luv my "clacker Jabber"
Who is online
Users browsing this forum: No registered users and 19 guests