Hey,
I have a shorty GQ the 4" coils.
Im getting quite abit of vibration from the rear shaft.
Now before i go get it checked to make sure its balanced i wanna know how others have setup theres? eg. what angles u running??
Im running a double cardon too.
Cheers
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Lifted shorty rear drive shaft HELP
Lifted shorty rear drive shaft HELP
----------------------------------------------------
Xcab Lux on 37 Treps
Xcab Lux on 37 Treps
vibration
Hey i had a shorty with 6 inch coils, and the DC shaft wasnt enough. I ended up getin adjustable upper control arms and made the bottom uni straight with the diff flange. That fixed it. U could also try gearbox spacers.
06 Grand Vitara Prestige, 2" lift, Kumho A/Ts, ARB winch bar, snorkel, spotties. Also a Regal 2150 LSC Volva Penta 350 gsi duoprop, and a kayak ;-)
matey i got standard shaft in mine with 5 inch coils. using lengthend lower arms ( cheezy bomb proof 18mm longer than standard). im guessing the vibes ur getting will be from the slip joint/spline region. as u lift ur truck the shaft opens up/lengthensmeaning that the inner and outer tubes have less bearing on each other cuasing slop or a slight wobble. also amplified by wear in the slip joint.
Who is online
Users browsing this forum: No registered users and 3 guests