Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

40 and 60 series diff centres

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 173
Joined: Mon Dec 18, 2006 5:14 pm
Location: McCrae

40 and 60 series diff centres

Post by TimmayFj40 »

just wondering if the ratios of 40 series and 60 series diff centres are the same, and will 40's centres fit in 60's housings.

and if its a stupid question, Sorry.

lol

thanks Tim
Ready to start the 40 series project, turn 2 into one, Just gotta clean the fuggin shed.....
Top
Posts: 2820
Joined: Sun May 25, 2003 10:04 am
Location: Redbank Plains, QLD

Post by Daisy »

40 centres have a course spline on the pinon flange.

60's have a fine spline. (been told it was stronger)

both are interchangeable housings.
custom bar work, 4x4 parts, trailers, anything out of steel/alloy :D
Top
Posts: 173
Joined: Mon Dec 18, 2006 5:14 pm
Location: McCrae

Post by TimmayFj40 »

ok thanks, and the ratios are the same???
Ready to start the 40 series project, turn 2 into one, Just gotta clean the fuggin shed.....
Top
Posts: 734
Joined: Sun Mar 06, 2005 5:25 pm
Location: Sunshine Coast Queensland

Post by midi73 »

TimmayFj40 wrote:ok thanks, and the ratios are the same???
Yep
Top
Posts: 207
Joined: Thu Jun 26, 2003 10:02 pm
Location: sydney

Post by turbo4t »

Daisy wrote:40 centres have a course spline on the pinon flange.
Only the early 40's have the coarse spline, up to about '79 i think. The later 40's are identicle. All are interchangeable though.
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 0 guests