Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

1.3l swift engine conversion question

Tech Talk for Suzuki owners.

Moderators: lay80n, sierrajim

Forum rules
Post Reply
Posts: 18
Joined: Mon Dec 25, 2006 4:15 pm

1.3l swift engine conversion question

Post by Libber »

Gday
I'm in the process of fitting a replacement engine into my sierra.
I know I need to swap the sump, oil pick up, inlet maniford, exhaust manifold as the new motor is out of a fwd car. My question is about the distributor - i've read that this may or may not fit? And can I just swap the old one straight on or are there internal parts like the cam that need changing?
Also, I'm lead to believe that the clutch is not the same. The one on the new motor is quite good - can I swap parts between them or do I need special tools to align it all?
Can anyone clarify??
Cheers
Top
Posts: 380
Joined: Thu Apr 07, 2005 8:56 pm
Location: Brisbane

Post by Cruzer! »

mate is it a g13b swift gti motor or just a normal g13a/ba from a standard swift?
[url=http://www.outerlimits4x4.com/ftopic129164.php[u]Supercharged SAS FJ Cruiser[/url]
Top
Posts: 459
Joined: Sat Jul 29, 2006 8:39 pm
Location: brisbane (boganhole)

Post by short stuff »

id say its gti his talking about
Top
Posts: 18
Joined: Mon Dec 25, 2006 4:15 pm

Post by Libber »

Yeah its the standard swift motor. I just am looking for something that runs at this stage!
Top
Posts: 6229
Joined: Thu Dec 12, 2002 10:37 am
Location: melbourne victoria australia

Contact:
Contact christover1

Post by christover1 »

The cam drive to dizzy is different on some later swifts.
But some early ones have same drive as Sierra, so just swapping the dizzy over will work.
If not you need to change the cam over to the Sierra cam, or cut hole in firewall for dizzy.
You can buy a right angle dizzy conversion, but it may only be for gti?

christover
4WD SUZUKI CLUB VICTORIA
http://www.vic.suzuki4wd.com/forum/
Top
Posts: 18
Joined: Mon Dec 25, 2006 4:15 pm

Post by Libber »

Cheers mate
I'll pull them both out and have a look.
Top
Posts: 18
Joined: Mon Dec 25, 2006 4:15 pm

Post by Libber »

OK had a look, no dizzy came on the new motor, the one off the old motor definately does not fit.
Any idea who I can ring to find out about a right angled adaptor? Really keen not to muck around changing cams over!
Top
Posts: 6229
Joined: Thu Dec 12, 2002 10:37 am
Location: melbourne victoria australia

Contact:
Contact christover1

Post by christover1 »

try typing right angle dizzy drive into search, with use all terms clicked.
It finds a few threads on subject, including this one http://carl.outerlimits4x4.com/viewtopi ... izzy+drive

I went thru the same hunt, and finaly just swapped over the cams. Wasn't as bad as I expected, but certainly not for inexperienced hands.
4WD SUZUKI CLUB VICTORIA
http://www.vic.suzuki4wd.com/forum/
Top
Posts: 870
Joined: Sat Jun 03, 2006 5:32 pm
Location: sydney

Post by MART »

I swapped my brother in laws sierra g13a for swift g13b,i used g13a head,maybe yours is damaged.
BLOWNZUK 1.3 efi,sc14 supercharger,hilux diffs,detroit lockers,stage 4 rockhopper,6 point cage,35 muddies.
Top
Post Reply

Return to “Suzuki”

Who is online

Users browsing this forum: No registered users and 53 guests