Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

How to adjust GU front wheel bearing?

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Forum rules
Post Reply
Posts: 87
Joined: Sat Jan 15, 2005 8:51 pm
Location: North Coast

How to adjust GU front wheel bearing?

Post by speed=t/d »

Can't find anything on the net to help. How do you adjust GU wheel bearings? I've relaced bearings on a HJ45 but I've got to the two phillips head scres in a plate with holes prior to the bearing. How do you get this off and what next. Sorry to be a pain as I know alot of U are in the mechanical field. I'm in the bush and have no option. Thanks for any info. Regards, Chris. :oops: Anyway 'HAPPY NEW YEAR'
Top
Posts: 79
Joined: Sat May 08, 2004 8:56 am
Location: Sydney

Post by GU_247 »

The plate with the two phillips head screws is a locking plate which has two tabs which stop the nut from rotating. Undo the two screws then remove the plate (ive found it is best to use long nose pliers as the grease tends to make the plate stick to the nut) You will notice that the plate has a series of holes in it as well as the bearing nut having another set of holes as well. There should be one set of holes that is close after you have adjusted your bearings. Hope this helps
Top
Posts: 87
Joined: Sat Jan 15, 2005 8:51 pm
Location: North Coast

Post by speed=t/d »

Thaks, that helps as I thought that the plate may have had a srew tread on it and perhps it should be spun off the thread. instead I'll use the l/N pliers. thanks.
Top
Post Reply

Return to “Nissan”

Who is online

Users browsing this forum: No registered users and 5 guests