Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

L28 no turn over

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Post Reply
Posts: 680
Joined: Tue May 11, 2004 9:24 pm
Location: Melbourne

L28 no turn over

Post by MereMale »

Also in Tech/Discussion

Car ran yesterday.
Just replaced power steer belt, and had brakes done a few days before that.
Now I get all the dash lights, but wont turn over as if ignition wire at dizzy had come off. As once broken before, so hence checked that and it seems fine.

Any ideas please????

Thanks in advance.

Mere
Posts: 902
Joined: Wed Jul 21, 2004 5:29 pm
Location: Sydney

Post by stool »

Starter motor mabe

:idea:
GQ with big nuts
Posts: 680
Joined: Tue May 11, 2004 9:24 pm
Location: Melbourne

Post by MereMale »

Best way to check :?: :?:

Edit: Changed starter motor with another, result :cry: :cry: :cry: :cry: no joy :cry: :cry: :cry:

Mere
g@z
Posts: 107
Joined: Tue Jan 24, 2006 9:46 pm
Location: Yes

Re: L28 no turn over

Post by g@z »

MereMale wrote:Also in Tech/Discussion

Now I get all the dash lights, but wont turn over as if ignition wire at dizzy had come off. As once broken before, so hence checked that and it seems fine.

Mere
A bit confused with that statement. I would have thought that if the dizzy wire had come off it would turn over but not fire up. Does the starter motor turn or not? Does the stater solenoid click ? Sounds more like a dead battery to me, ie enough power to light the little dash lights, but not enough to turn the starter.

Regards,
g@z.
Posts: 680
Joined: Tue May 11, 2004 9:24 pm
Location: Melbourne

Post by MereMale »

By what I can tell the battery is ok, and the starter motor isn't even trying to kick over. Yes the solenoid is clicking.
Posts: 1301
Joined: Mon Aug 07, 2006 9:13 am
Location: bogged in a bloddy hole again.

Post by to_easy »

MereMale wrote:By what I can tell the battery is ok, and the starter motor isn't even trying to kick over. Yes the solenoid is clicking.
sounds like the starter motor stuck on the flywheel somehow if you change it. check the starter motor to see if it works out of the car first.
Posts: 680
Joined: Tue May 11, 2004 9:24 pm
Location: Melbourne

Post by MereMale »

If that the case, what is the best way to free it up and to stop it happening again??

Mere
Posts: 1301
Joined: Mon Aug 07, 2006 9:13 am
Location: bogged in a bloddy hole again.

Post by to_easy »

id take the starter motor back out. and see if it work out the car.sound like the starter motor is self has gone.and not the solinode. see if you can turn the cog on the starter motor it mite be siezed. :roll:
Posts: 680
Joined: Tue May 11, 2004 9:24 pm
Location: Melbourne

Post by MereMale »

Starter motor itself is ok, as just put the orig one back in and it fired.
So I'd say the stuck part was correct, and now just wondering how to stop that from happening again if at all poss.

Mere
Posts: 1301
Joined: Mon Aug 07, 2006 9:13 am
Location: bogged in a bloddy hole again.

Post by to_easy »

if it not siezed id take it to the auto eletrics and get him to cheak it, it mite have burt out
Posts: 1301
Joined: Mon Aug 07, 2006 9:13 am
Location: bogged in a bloddy hole again.

Post by to_easy »

sorry sounds like the teeth did line up, just rock the car back and forth in gear
Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest