Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

body lift and legalities??

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Forum rules
Post Reply
Posts: 185
Joined: Wed Apr 20, 2005 1:47 pm

body lift and legalities??

Post by jigga »

a very reputable 4wd shop (who gets tons of mentions on this site) recommended 33's and 2inch body lift in qld.

He said it was the max i could go with my existing 2' lift.

i know the onus is on me to do the research, which is why i thought that what he is saying is illegal in qld.

your thoughts?
Top
Posts: 317
Joined: Sun Jul 17, 2005 8:08 pm
Location: western australia

Post by crack »

yeh i thought it was 2" lift in total. maybe its just wa but i thought qld had tighter rules?

jack
If all else fails, use a bigger hammer

hilux- locked lifted and turboed
Top
Posts: 185
Joined: Wed Apr 20, 2005 1:47 pm

Post by jigga »

im pretty sure it is 1/3 bump stop etc.

BUt the company in mind(who are very well respected qld wide) definately said 2 and 2 and 33's are fine. i know at the end of the day its my decision, but i pay for insurance, and i sure want it to stand if in an accident.
Top
Posts: 57
Joined: Tue Jun 13, 2006 4:39 pm
Location: Northern NSW

Post by TimMQ »

At the end of the day its up to your insurance mob? Would pay to talk to them.

Tim
Top
Posts: 1889
Joined: Mon Sep 20, 2004 10:23 pm
Location: Brisbane

Post by just cruizin' »

jigga wrote:im pretty sure it is 1/3 bump stop etc.

BUt the company in mind(who are very well respected qld wide) definately said 2 and 2 and 33's are fine. i know at the end of the day its my decision, but i pay for insurance, and i sure want it to stand if in an accident.
Bump stops are fitted to the chassis so 1/3 bumpstop is suspension only. I'm pretty sure 2" is OK but has to be approved by QLD Transport, special form and inspection.
Top
Posts: 5179
Joined: Fri Dec 05, 2003 8:15 pm
Location: Brisbane Australia

Post by Shadow »

2inch body lift is the max you can go in QLD regardless of what suspension lift you have. If you have 10" suspension lift (that complies, which it wouldnt) you can still have a 2" body lift.

2inch, and it must be approved by QLD transport prior to installation (obtained by submitting a written application to QLD transport), and inspected by a QLD transport officer at a QLD transport inspection station after installation, where they will look at the whole vehicle.
Top
Posts: 3739
Joined: Sat Dec 11, 2004 10:10 pm

Post by mickyd555 »

your tyres can only be 15mm larger in diamater than what the standard tyre is stamped on the compliance plate so tyre size is dependandt on vehicle. What vehicle are we talking about??
Top
Post Reply

Return to “General Tech”

Who is online

Users browsing this forum: No registered users and 1 guest