Steering arms for Big Zuks?

Post by **alien** » Fri Jan 05, 2007 4:49 pm

Hey all

I've been waiting some time now for a certain company produce a steering arm that actually fits on my zuk... and its not happened yet - so im considering sending the parts that fit (tierod) back and getting $$ back and my caliper, to get another solution sorted out... cos i kind of need to be able to steer! haha

Heres the setup:

Zuk diffs
SPOA with Hilux Front springs
Vitara brakes on front (from 1.8l 4dr).

Im not trying to bag said company, but i am extremely disappointed and im very afraid i wont even get my brake caliper back, let alone any money...

so who can help? =)

Post by **Bad JuJu** » Fri Jan 05, 2007 7:26 pm

Snake Racing, or M&M/ABT4x4.com or go to the US for bits - which is probably cheapest.

Post by **alien** » Fri Jan 05, 2007 8:30 pm

doesnt the USA only do left hand drive kits?

Post by **bazooked** » Fri Jan 05, 2007 10:35 pm

im sure u have been told already that ur vit calipers are to big in diameter and dont leave enough meat on top for the arm this is the problem im led to believe, and to engineer it with strenght is goin to be tricky for the best of them.

Post by **nicbeer** » Fri Jan 05, 2007 10:57 pm

be best to downszie the brakes and go for std histeer.

Nic

Post by **alien** » Sat Jan 06, 2007 11:09 am

to tell you the truth i havent been told anything other than "its done, ill send it tomorrow" for the past 6 months...

Post by **fool_injected** » Sat Jan 06, 2007 6:04 pm

bazooked wrote:im sure u have been told already that ur vit calipers are to big in diameter and dont leave enough meat on top for the arm this is the problem im led to believe, and to engineer it with strenght is goin to be tricky for the best of them.

Can you use the Vit rotors and Sierra calipers?

Post by **bazooked** » Sat Jan 06, 2007 10:56 pm

fool_injected wrote:
bazooked wrote:im sure u have been told already that ur vit calipers are to big in diameter and dont leave enough meat on top for the arm this is the problem im led to believe, and to engineer it with strenght is goin to be tricky for the best of them.
Can you use the Vit rotors and Sierra calipers?

whats the point?

Post by **fool_injected** » Sun Jan 07, 2007 12:38 am

slotted rotors -v solid

Post by **alien** » Sun Jan 07, 2007 2:17 pm

you can get vented rotors for the sierra brakes... i just put vitara calipers and rotors on cos my sierra ones were flogged out and the opportunity presented itself at the time to do the swap... and the brakes felt FAR better - especially when the rear drums filled with water - the fronts were far more effective.

I didnt realise when i ordered the steering arm, and mentioned the larger calipers that it would be such a pain in the ass to get something done for it... but, live and learn - i'm told that a solution has been found and its all good to go - i just havent seen anything arrive at my door =)

Should the new arm actually exist, im sure its going to be a great product. In the meantime however ill be doing some research on other manufacturers!

Post by **fool_injected** » Sun Jan 07, 2007 2:38 pm

Just asked cause I am getting a Vitara halfcut (hopefully this week)
Thought I might as well use what ever I can off it
I got SOA with hi-steer so the calipers are probally out of the question
Might just wait and try and see if I work something

Outer Limits 4x4 Board

Steering arms for Big Zuks?

Steering arms for Big Zuks?

Who is online