Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Injectors ?

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Forum rules
Post Reply
Posts: 161
Joined: Sat Dec 03, 2005 4:10 pm
Location: melb east

Injectors ?

Post by bigears »

Ok i searched the forum and found part of what i was looking for but was hoping someone could help me with the rest :D
Found on here that GTR injectors fit in the tb 4.2 fuel rail when you change the o-rings, but wanted to no which gtr injertors are the ones to get ?
(what model? )
Also what kind of power can these injectors handle?
cheers thanks for the help
Bigears ;)
GQ lwb . 31's beadlocked ,1inch sus and 37rwkw look out for EVIL GQ
Top
Posts: 161
Joined: Sat Dec 03, 2005 4:10 pm
Location: melb east

Post by bigears »

anyone? i rang around today and no can give me an answer :?
GQ lwb . 31's beadlocked ,1inch sus and 37rwkw look out for EVIL GQ
Top
Posts: 342
Joined: Mon Aug 01, 2005 4:18 pm
Location: Brisbane

Post by bluemq »

If GTR injectors fit the fuel rail, then I would also assume 460cc RX7 injectors fit.

You can find them for ~15$ each if you hunt around, if not, I can give you a number of a guy who will have some for around that price.

Very cheap, but of course the seals will need replacing & you will need to get them cleaned/flow tested.

Better then paying a mint for GTR injectors though as they usually quite expensive.
Top
Posts: 478
Joined: Tue Jul 18, 2006 8:43 pm
Location: outer east Melb.

Contact:
Contact MUD EMPIRE

Post by MUD EMPIRE »

cut a hole in the floor like Fred Flintstone...............
Top
Posts: 161
Joined: Sat Dec 03, 2005 4:10 pm
Location: melb east

Post by bigears »

MUD EMPIRE wrote:cut a hole in the floor like Fred Flintstone...............
Might have to if i cant find the right injectors :cry:
GQ lwb . 31's beadlocked ,1inch sus and 37rwkw look out for EVIL GQ
Top
Posts: 148
Joined: Fri Dec 29, 2006 9:22 pm
Location: Melbourne

Re: Injectors ?

Post by juls »

bigears wrote:Ok i searched the forum and found part of what i was looking for but was hoping someone could help me with the rest :D
Found on here that GTR injectors fit in the tb 4.2 fuel rail when you change the o-rings, but wanted to no which gtr injertors are the ones to get ?
(what model? )
Also what kind of power can these injectors handle?
cheers thanks for the help
Bigears ;)
AFAIK all gtr are the same. 440cc which is probably good for 300 rwkw, probably more.

Some skyline injector info:
http://www.meggala.com/injectorscss.htm

Says RB26 injectors are Top feed low impedance injectors. RX7 ones seem to come in both high and low impedance flavors, low being more common.

It is potentially cheaper to buy the gtr injectors direct from japan yahoo auctions. They still fetch a fair price here.

Or find something new that fits your purpose at www.injectorsonline.com
Last edited by juls on Sat Jan 06, 2007 1:24 am, edited 1 time in total.
Top
Posts: 148
Joined: Fri Dec 29, 2006 9:22 pm
Location: Melbourne

Post by juls »

www.ausrotary.com - you can find rx7 injectors cheap, just gotta buy them up in 2 and 4 injector lots so it takes a while.

If youre stuck let me know i should have a set of 6 rx7 injectors however they do need to be tested and cleaned. My ones are 550cc.

You might try www.skylinesaustralia.com for skyline injectors.

goodluck
Top
Posts: 161
Joined: Sat Dec 03, 2005 4:10 pm
Location: melb east

Post by bigears »

thanks heaps ;)
GQ lwb . 31's beadlocked ,1inch sus and 37rwkw look out for EVIL GQ
Top
Post Reply

Return to “Nissan”

Who is online

Users browsing this forum: No registered users and 2 guests