Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

GQ 4.6 Front Diff into MQ Patrol with 4.625???

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Forum rules
Post Reply
Posts: 81
Joined: Tue Apr 26, 2005 7:00 am
Location: Brisbane

GQ 4.6 Front Diff into MQ Patrol with 4.625???

Post by Rosey55 »

Hi Guys,

Is this likely to cause problems? GQ 4.6 Front Diff under a MQ with a 4.625 in the rear? Anyone done it? I would guess it could put some additional load on drive train?

cheers
Top
Posts: 902
Joined: Wed Jul 21, 2004 5:29 pm
Location: Sydney

Post by stool »

Gq is 4.625:1 as well so all is good
GQ with big nuts
Top
Posts: 2877
Joined: Mon May 10, 2004 9:46 pm
Location: Goodna QLD

Post by ludacris »

You can use GQ CV,s in the MQ front diff. Not sure if anything has to be moded but if that is why you want to change the complete diff over might be easier to sort than thought of.

LudaCris
Cris's 4 X 4 Accessories & Suspension 0404 736 325 Rock Sliders From $499
Top
Posts: 1595
Joined: Tue Dec 02, 2003 4:11 pm
Location: Warner, Brisbane Nth

Post by Spartacus »

ludacris wrote:You can use GQ CV,s in the MQ front diff. Not sure if anything has to be moded but if that is why you want to change the complete diff over might be easier to sort than thought of.

LudaCris
arent the gqs axles wider? i wonder how it works
MULL
Top
Posts: 625
Joined: Fri Feb 20, 2004 12:04 am
Location: Melbourne

Post by Woop »

You need to look for a GQ leafsprung front axle housing--ie early GQute--Then a GQ front diff center to fit into it.. I think its the same width as an MQ/MK rear axle..

Nick
Top
Posts: 81
Joined: Tue Apr 26, 2005 7:00 am
Location: Brisbane

Post by Rosey55 »

nar doing it for a coil MQ project i've started. MQ/GQ chassis are the same width so the GQ diff should go straight under with some new mounts on the chassis

thanks for the input everyone.
Top
Post Reply

Return to “Nissan”

Who is online

Users browsing this forum: No registered users and 2 guests