Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Electronic rust protection

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Post Reply
Posts: 171
Joined: Sat Feb 11, 2006 1:38 pm
Location: Brisbane

Electronic rust protection

Post by Wilko76 »

Hi All

Did a search and couldn't really find the answers to my question.

Just purchased a 1999 Nissan 4.2 TD and want to rust proof it. Was thinking electronic. Any recommendations on what units? Found a few on ebay but prices vary. A few were under $200 and a few about 500. What's difference?

Look forward to your comments!
Posts: 613
Joined: Fri Oct 21, 2005 9:33 pm
Location: virginia, brisbane

Post by ausoops »

ive got a erps and i'd say it works.

ive got no rust on the body or chassis the only thing that rusted straight away was a galvo bolt on the nudge bar it rusted up really bad in only a week and i had to grind it off. but my mate and i have the same car bought at the same time in the same condition, and we've both been doing the same driving, including quite a few runs up bribie beach and his is starting to get corrosion in the wheel wells and around the chassis on scratches and the like.

also i had a big amount of paint chip off the lhs door on the edge and it went to bar metal and still hasn't even got surface corrosion after a few months. i fixed it anyway though.
Posts: 171
Joined: Sat Feb 11, 2006 1:38 pm
Location: Brisbane

Post by Wilko76 »

what electronic converter do you have?
Posts: 613
Joined: Fri Oct 21, 2005 9:33 pm
Location: virginia, brisbane

Post by ausoops »

erps
Posts: 572
Joined: Thu Mar 31, 2005 10:17 pm
Location: Mooroolbark Vic

Post by Jaffa »

I had an ERPS brand system on a VL Crummydore, it had a fair amount of rust when I put it on, but it didn't get any worse during the 2 years I owned the car.
Posts: 1253
Joined: Thu Dec 12, 2002 1:34 am
Location: QLD

Post by Jeeps »

I also agree that it works. I bought my Wrangler brand new and in the first 12 months of bush and beach bashing, i'd added a few marks to my towbar and had to sand back and re-paint it every 2-3 months from all the beach work i was doing otherwise rust was accumulating pretty quick - almost overnight on bare metal. Also my front tow hooks, although they never got much use always seemed to bubble up with rust on the bolt heads where i sanded back and painted them every few months.

I then fitted ERPS (4 pads) and i in the last 4, yes that's right FOUR years i've done much more bashing and beach work and used the tow hooks A LOT and havn't painted it in the last few years at all.

The only stuff that i notice rusting is my soft top components which are mostly insulated from the body & therefore also insulated from the ERPS current.
Posts: 5062
Joined: Tue Mar 09, 2004 5:06 pm
Location: queensland

Post by ofr57 »

so how much juice does electronic converter take out of the car .... thinking on putting it on my zook ute noticed 2 spots on the chassie
an how much is it?
[color=green]Vote Earth[/color]
Posts: 1253
Joined: Thu Dec 12, 2002 1:34 am
Location: QLD

Post by Jeeps »

I think it takes about 80 miliamps or about 6 months until your battery is dead. :) I leave my jeep for 2-4 week stints in the garage without starting it and it doesn't affect the battery at all - starts up no worries.
Posts: 69
Joined: Sat Aug 28, 2004 9:14 pm

erps

Post by Darren Cooper »

How much does it cost ?
Posts: 1253
Joined: Thu Dec 12, 2002 1:34 am
Location: QLD

Post by Jeeps »

I had it fully installed by a 4wd outlet for $450.
Posts: 918
Joined: Fri Jul 22, 2005 12:49 pm
Location: canberra

Post by 460cixy »

had one on the old mans disco that was on fraiser daily as a hire car and had no sign of rust or electrolice just the light serface rust that was all ready on it. was used for a year before it was sold if it was going to rust im sure it would of done it in a year we had other junk like jackaroos ect that were eaten in in 6 months all the bolts on the chassie eaten off ect
range rover & series one landy!
Posts: 1908
Joined: Thu Aug 04, 2005 8:09 pm
Location: central queensland

Post by known 2 »

i have couplertech on my cruiser and i duno if it works or not my 80 still seem to be rusting in small places but it does look shiny.
also these units hate water sa make sure all conections are soldered when installed.
kaylee 2004 hdj78 RV. 33 mickey atz's, winchbar, 3i lift, 3i exhoust, spoties, roofracks and ufh. pimped interior .

86 lwb zook wt soa, 33's, locked, bard up, prety lights. monster tacho:/
Post Reply

Who is online

Users browsing this forum: No registered users and 41 guests