Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Diesel/Petrol conversion... tank & lines ???

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Forum rules
Post Reply
Posts: 67
Joined: Mon Jan 16, 2006 8:14 pm
Location: Brisbane

Diesel/Petrol conversion... tank & lines ???

Post by MissMU »

im doing an engine swap in my MU and just wondering what needs to be done to accomodate this successfully in the area of fuel tank & lines ?

obviously the fuel lines/fuel tank need to be cleaned so they can be used with petrol or am i needing to get all new lines and new tank?

is there anything else i need to be aware of when going from diesel to petrol in the area of fuel issues ?

thanks :D
the police never find it as funny as i do!
Top
Posts: 3064
Joined: Sun Jun 12, 2005 11:00 pm
Location: Yinnar South, Vic

Contact:
Contact cloughy

Post by cloughy »

They'll be fine, it only depends if you have/need a return line and its not there
Wanted: Car trailer or beaver tail truck, let me know what you got
Top
Posts: 2590
Joined: Tue Jan 04, 2005 11:33 am
Location: Brisbane

Post by Chucky »

cloughy wrote:They'll be fine, it only depends if you have/need a return line and its not there
If it's a diesel then it has to have a return line.
My Cruiser is Environmentally Friendly.

It runs on recycled Dinosaurs.
Top
Posts: 734
Joined: Sun Mar 06, 2005 5:25 pm
Location: Sunshine Coast Queensland

Post by midi73 »

Chucky wrote:
cloughy wrote:They'll be fine, it only depends if you have/need a return line and its not there
If it's a diesel then it has to have a return line.
Depends what injector pump it has.
My 3b diesel didnt have, but the 14b has.
Top
Posts: 736
Joined: Mon Mar 07, 2005 5:25 pm
Location: Redcliffe, Brisbane

Post by chops »

you may need some extra bits splicing into your wiring - for coil pack(s)/igniter/whatnot, fuel pump wiring/relay etc etc
1988 351W GQ wagon
Top
Posts: 3132
Joined: Wed Sep 28, 2005 3:22 pm
Location: Newy

Post by HotFourOk »

I know when going from carby to EFI petrol you need a new tank and line to suit the EFI engine, dunno about diesel though.
I'd get the tank taken out and cleaned really well... maybe even get it done professionally.. could save hassles later down the track.

Also, for engineering purposes, do you need to install a new fuel filler which can only accomodate the smaller ULP size fuel nozzle?? Just a thought.
Top
User avatar
V8Patrol
God of Magnificant Ideas!
Posts: 6774
Joined: Mon Aug 04, 2003 11:22 am
Location: Balls Deep

Post by V8Patrol »

Thread cleaned.......

The QUESTION is specifically about the fuel tank and the fuel lines.....

Keep it on topic plz

Kingy
[color=blue][size=150][b]And your cry-baby, whinyassed opinion would be.....? [/b][/size][/color]
Top
User avatar
V8Patrol
God of Magnificant Ideas!
Posts: 6774
Joined: Mon Aug 04, 2003 11:22 am
Location: Balls Deep

Post by V8Patrol »

HotFourOk wrote:Also, for engineering purposes, do you need to install a new fuel filler which can only accomodate the smaller ULP size fuel nozzle?? Just a thought.

Simple answer .... yes

Filler neck must be changed to suit fuel type.

Kingy
[color=blue][size=150][b]And your cry-baby, whinyassed opinion would be.....? [/b][/size][/color]
Top
Post Reply

Return to “General Tech”

Who is online

Users browsing this forum: No registered users and 0 guests