Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

ute tray regulations?

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Forum rules
Post Reply
Posts: 56
Joined: Wed Oct 05, 2005 9:26 pm
Location: Queensland

ute tray regulations?

Post by Mr. octurbo »

Gday,

iv been looking around the web for sometime now and i wanted to know
is there any laws/regulations for making your own ute tray. the one i got on now looks a bit old, has a crack in the aliminium.

my plan was to use the same bits of steel that run underneith it but put wood on insted. so have a frame ect with wood floor boards bolted/screwd in.

so, are there any laws or regulations in queensland that mainroads have reguarding home made ute trays?

thanks

mat.
WHAT!?...WHAT!?...oh no no its not fast at all, just loud!!!

[quote="Ezookiel"] abseiling without the rope you left at home just doesn't have quite the same success rate. [/quote]
Top
Posts: 42
Joined: Sat Sep 02, 2006 8:34 pm
Location: SW Sydney

Post by McSumWay »

There are actually no rules specifically regarding the building of home made trays by the RTA.

However all vehicle ADRs such as light emmitence angles apply as well as the need to use sound engineering practises and rules regarding the maximum sizes of the vehicle.
Apathy is the Enemy!!!!
Top
Posts: 56
Joined: Wed Oct 05, 2005 9:26 pm
Location: Queensland

Post by Mr. octurbo »

hey thanks mate for the info.
when i get it done might show some pictures.
WHAT!?...WHAT!?...oh no no its not fast at all, just loud!!!

[quote="Ezookiel"] abseiling without the rope you left at home just doesn't have quite the same success rate. [/quote]
Top
Posts: 42
Joined: Sat Sep 02, 2006 8:34 pm
Location: SW Sydney

Post by McSumWay »

Would love to see it.

I worked for ten years making trays for one of the largest companies in Australia.
Apathy is the Enemy!!!!
Top
Post Reply

Return to “General Tech”

Who is online

Users browsing this forum: No registered users and 64 guests