Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Dana's in Volvos?

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Forum rules
Post Reply
Posts: 5226
Joined: Sun Jul 27, 2003 2:03 pm
Location: Sydney

Contact:
Contact Squik

Dana's in Volvos?

Post by Squik »

A little bird told me that Volvos have Dana diffs??? :shock: :shock:

Is this true and what's the go on using them???
DRS smells like a cat-food milkshake... and wet socks... and gorgonzola cheese... all whizzed up in a blender
Top
Posts: 16934
Joined: Sun Oct 20, 2002 6:57 pm

Post by RUFF »

They have a Dana style diff. Gearing around the 3.9 to 3.5 but i dont beleive they are a Dana 44 or even a 30. Im not even sure they were made by Dana. Used to be a very popular swap in to Torana's as they were a similar width had disc brakes and were the same stud pattern.
Top
Posts: 7230
Joined: Mon Oct 21, 2002 10:42 pm
Location: Brisbane

Post by MissDrew »

Did you know ditchwitches have dana diffs. I don`t know if all models have the same diff but I know some come out with dana 44`s. Even know of one that now has detriot diff locks front and rear as he got sick n tied of it getting stuck all the time when trying to dig trenches.
Top
Posts: 7230
Joined: Mon Oct 21, 2002 10:42 pm
Location: Brisbane

Post by MissDrew »

Just did a quick search and got this.
http://www.ditchwitch.com/dwcom/Equipme ... View/10779
Dana model 44, limited slip; optional Dana model 60, limited slip
Top
Posts: 3278
Joined: Mon Mar 03, 2003 9:03 pm
Location: St Helena, Melbourne.

Post by Loanrangie »

Volvo dana's are actually a good conversion for holdens and fords as the track is pretty close, i have seen one fitted to an EH and think they have ford stud pattern.
Saddle up tonto, its the not so loanrangie! . 98 TDI DISCO lightly modded with more to come.
Top
Posts: 644
Joined: Wed Sep 01, 2004 3:11 pm
Location: N.S.W

Post by tuf045 »

Loanrangie wrote:Volvo dana's are actually a good conversion for holdens and fords as the track is pretty close, i have seen one fitted to an EH and think they have ford stud pattern.
the volvo diffs have early holden or torana stud pattern.
Reptile fabrication.
www.agroautomotive.net
Top
User avatar
HG
Posts: 450
Joined: Mon Aug 02, 2004 10:11 pm
Location: Mexico where the hills are big

Post by HG »

Yeah but they have a flaw as when you install one in you car the lights never turn off again :D
Cheers
Andrew
----------------------
Just a few mods, nothing over the top.:)
Top
Posts: 3278
Joined: Mon Mar 03, 2003 9:03 pm
Location: St Helena, Melbourne.

Post by Loanrangie »

tuf045 wrote:
Loanrangie wrote:Volvo dana's are actually a good conversion for holdens and fords as the track is pretty close, i have seen one fitted to an EH and think they have ford stud pattern.
the volvo diffs have early holden or torana stud pattern.
Cool, thats why it fitted the EH so well.
Saddle up tonto, its the not so loanrangie! . 98 TDI DISCO lightly modded with more to come.
Top
Posts: 359
Joined: Mon May 08, 2006 12:09 pm
Location: Wynnum West, Qld

Post by Moses »

anymore info on this would be awsome

as i am looking to upgrade my Jeep XJ to get rid of the Dana 35,
i am looking into a Ford Explorer rear end with the Ford 8.8 diff,
but would rather get a Dana 44

so if anyone knows the correct stud pattern and axel width that would be awsome
Top
Posts: 8556
Joined: Mon Jun 13, 2005 9:34 pm
Location: Sydney

Post by RockyF75 »

Are lockers still readily available for them?
60 + Turbo, 33"s :armsup:
Top
Posts: 783
Joined: Sat Jan 01, 2005 1:34 pm
Location: Narellan NSW

Post by andrew e »

Moses wrote:anymore info on this would be awsome

as i am looking to upgrade my Jeep XJ to get rid of the Dana 35,
i am looking into a Ford Explorer rear end with the Ford 8.8 diff,
but would rather get a Dana 44

so if anyone knows the correct stud pattern and axel width that would be awsome

http://www.outerlimits4x4.com/viewtopic.php?t=97075
Top
Posts: 2588
Joined: Mon Apr 19, 2004 10:45 pm
Location: Hobart Tas

Post by Reddo »

what is it with Volvos? Race car mate is always robbing bits off them, eg., front 4 pot calpiers and rotors allegedly fit lots of European Fords, and improve stoping power heaps...

... and other issue is that with Volvo parts, your car will want to run ove motorcycles..
Nice gq swb ute chop with a huffer for the good times
Top
Posts: 67
Joined: Fri Nov 29, 2002 11:22 am
Location: Hornsby NSW

Post by tjames »

I used to have an old volvo and a guy in one of the volvo car club had a volvo rally car that had an air locker from the front of a wrangler supposedly.

Thomas
76 2 door Rangie, 33" MTR's, GQ Diffs, 3.9 Disco EFI, ZF Auto.
Top
Posts: 359
Joined: Mon May 08, 2006 12:09 pm
Location: Wynnum West, Qld

Post by Moses »

well that would suggest it had a Dana 30 in the rear

in that case no bloody good to me :roll:

but those Dana's from the fire truck sound awsome, if only i had the $$
Top
User avatar
Guy
Posts: 10366
Joined: Thu Dec 12, 2002 8:43 am
Location: Wangaratta

Post by Guy »

A golf buggy I tipped on it's side (while looking for my golf ball in the very very rough) had the tinniest Dana diff in it .. the tag said it was a Dana 21 or 22 ..

If your after a 44 Some Rodeo's have em in the rear i believe (made under licence)
" If governments are involved in the covering up the knowledge of aliens, Then they are doing a much better job of it than they do of everything else "
Top
Posts: 5803
Joined: Wed Feb 19, 2003 3:02 pm
Location: Brisbane

Post by ISUZUROVER »

love_mud wrote:A golf buggy I tipped on it's side (while looking for my golf ball in the very very rough) had the tinniest Dana diff in it .. the tag said it was a Dana 21 or 22 ..
Sounds like the same diff the willys jeep had.

Series 3 LWB Land Rovers have Dana 60 copies in the rear.
_____________________________________________________________
RUFF wrote:Beally STFU Your becoming a real PITA.
Top
Posts: 1544
Joined: Tue Oct 22, 2002 8:37 am
Location: Performing booty fab in my Garage

Contact:
Contact Wooders

Post by Wooders »

I was sure the old 144's had Dana30 rear ends.....
Cheers [url=http://www.wooders.com.au]Wooders[/url]
Top
Posts: 84
Joined: Fri Feb 03, 2006 10:19 pm
Location: medowie

Post by dv8666 »

Just get a nine inch...... :D

Tougher than all, HUUUUUUUUUGE choice of ratios, LSD, Lockers, mini spool, full spool, anything is possible.....
You can even get an alloy housing if you want to save weight
Top
Posts: 359
Joined: Mon May 08, 2006 12:09 pm
Location: Wynnum West, Qld

Post by Moses »

i have given the 9" a bit of thought

but think i am just going to get an 8.8 Explorer arse end for my Jeep

it has all the ratios i want and can still put a locker in
Top
Posts: 166
Joined: Wed Apr 27, 2005 9:36 pm
Location: Gold Coast

Post by scout392 »

dv8666 wrote:Just get a nine inch...... :D

Tougher than all, HUUUUUUUUUGE choice of ratios, LSD, Lockers, mini spool, full spool, anything is possible.....
You can even get an alloy housing if you want to save weight
what makes you think the 9inch is thay much stronger??
78 scout 392ci V8 LPG, 727 TF, dana 20, dana 44 locked and loaded, 9" rear Diff. 10inch lift'n'so on
Top
User avatar
lay80n
God Of Emo
Posts: 7350
Joined: Sun Aug 24, 2003 7:04 pm
Location: Newy, home of the ZOOK (Rockin the 'diff)

Contact:
Contact lay80n

Post by lay80n »

scout392 wrote:
dv8666 wrote:Just get a nine inch...... :D

Tougher than all, HUUUUUUUUUGE choice of ratios, LSD, Lockers, mini spool, full spool, anything is possible.....
You can even get an alloy housing if you want to save weight
what makes you think the 9inch is thay much stronger??

Dana 60 would give the 9 inch a run for all the features you just mention any day, and you dont get the very low hung pinion hight with the dana. Every advantage you listed for the 9 inch is just as available, if not more so, for dana diffs.

Layto....
[quote="v840"]Just between me and you, I actually really dig the Megatwon, but if anyone asks, I'm going to shitcan it as much as possible! :D[/quote]
Top
User avatar
Guy
Posts: 10366
Joined: Thu Dec 12, 2002 8:43 am
Location: Wangaratta

Post by Guy »

lay80n wrote:
scout392 wrote:
dv8666 wrote:Just get a nine inch...... :D

Tougher than all, HUUUUUUUUUGE choice of ratios, LSD, Lockers, mini spool, full spool, anything is possible.....
You can even get an alloy housing if you want to save weight
what makes you think the 9inch is thay much stronger??

Dana 60 would give the 9 inch a run for all the features you just mention any day, and you dont get the very low hung pinion hight with the dana. Every advantage you listed for the 9 inch is just as available, if not more so, for dana diffs.

Layto....
For the exploder strenghth of a d60 or 9inch would never really be tested so it;s a non issue. The 9 inch has two beaings supporting the pinion at the crownwheel end as well as a thicker crownwheel and much more tooth contact between the pinion and crownwheel. Making the gearset incredibly strong.

You can get any number of lockers for the 9 inch .. but the 8.8 should allow you to keep your 5 on 4.5 or whatever it is stud pattern as well as nice uni joint and offroad friendly driveshaft angles.

if you look at a one from something like an XF ghia with the LSD no reason the LSD could not be shimmed up a bit ..
" If governments are involved in the covering up the knowledge of aliens, Then they are doing a much better job of it than they do of everything else "
Top
Post Reply

Return to “General Tech”

Who is online

Users browsing this forum: Bing [Bot] and 3 guests