Just bought a 94 GQ with 2.5 - 3 inches of lift and added a 30mm coil spacer to make it a definate 3.5-4 inch lift.
All suspension at the front has been done properly with castor correction bushes , adjustable panhard etc.
Dont know why but they left the stock panhard on the rear and my right side wheel/tyre sticks out at least 1 - 2 inches more that the left hand side wheel/tyre, soppuse the axel is out of allignment?
Will getting an adjustable panhard fix this problem and where is the best place to source them. Snake racing have em for $285 , is this a reasonable price?
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
rear adjustable panhard rod question.
rear adjustable panhard rod question.
-------------------------------------------------------
1994 GQ DX PATROL,chopped, DTS Turbo, 4" Dobinson lift, lockers, reduction gears, 38'' Maxxis
1994 GQ DX PATROL,chopped, DTS Turbo, 4" Dobinson lift, lockers, reduction gears, 38'' Maxxis
3rds productions are priced at $260 according to there site, and are built well, i run em on my truck, http://www.3rdsproductions.com.au/products22.html
Who is online
Users browsing this forum: No registered users and 2 guests