Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Is it true

Tech Talk for Mitsubishi owners.

Moderator: -Scott-

Forum rules
Post Reply
Posts: 47
Joined: Sun Oct 10, 2004 7:01 am
Location: Berwick Victoria

Is it true

Post by Dash007 »

Someone has told me that if I put GQ standard rear springs in my 94 NJ lwb Paj it will give me a 3" lift in the rear :P .
Just want to confirm imformation before I purchase them ??
Thanks heaps

Dash
If at first you don't succeed, go faster.
Top
Posts: 1107
Joined: Wed Jul 20, 2005 6:44 pm
Location: Melbourne

Post by hudson44 »

I think its close to a 4" to 5" lift. Depends whether they are new or sagged. The rear will sit a lot higher than the front tho.
Top
Posts: 203
Joined: Thu Aug 11, 2005 11:45 am
Location: Rosedale, gippsland

Post by 88pajero »

True, I have them in an nf. They work a treat. Have pics if you want to see the stance they have.
Jabber gone. Now have 98 nissan terrano and a 94 4.2ldiesel rv troopy on 33s slowly getting the fancy bits. How the hell do I change my user name?
Top
Posts: 71
Joined: Sat Jan 01, 2005 10:37 pm
Location: Melbourne Australia

Post by rhymus »

True. I also have them in my 88. 3-4 inch lift which is good but the best part is a much firmer ride. Might lose some flex but you can load her up pretty good.
92 NH Pajero, MQ Patrol 50mm lift. One has custom rust, dents & rattles, the other has a blown engine.
Top
Posts: 47
Joined: Sun Oct 10, 2004 7:01 am
Location: Berwick Victoria

Post by Dash007 »

88pajero wrote:True, I have them in an nf. They work a treat. Have pics if you want to see the stance they have.
That would be great to see pics.
If at first you don't succeed, go faster.
Top
Posts: 43
Joined: Mon May 09, 2005 4:54 pm
Location: Newcastle

Post by meminiau »

It's true! I have done it to my NG wagon. It stiffens up the rear so you can disconnect the swaybar for more articulation.

I then wound up the front torsions bars and sut the rubbers so that the truck was almost level.

cheers
deam
Top
Posts: 47
Joined: Sun Oct 10, 2004 7:01 am
Location: Berwick Victoria

Post by Dash007 »

Well job done came up a treat, it's made a big difference of road (took rear sway bar off). just need longer shocks, How do I figure out how long thay need to be ?? The Paj know sits 3 feet 2" thats from ground to bottom of gaurd I think thats ok considering I have no body lift :D .
Cheers for now and thanks for feedback :flasingsmile:
Darryl
If at first you don't succeed, go faster.
Top
Post Reply

Return to “Mitsubishi”

Who is online

Users browsing this forum: No registered users and 18 guests