Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Sierra turbo ???

Tech Talk for Suzuki owners.

Moderators: lay80n, sierrajim

Forum rules
Post Reply
Posts: 96
Joined: Fri May 20, 2005 5:13 pm
Location: Chicago

Sierra turbo ???

Post by zuku26 »

Ok here in the US we never got the 660cc turbo motor for our samurai's
Has anyone here installed the turbo from the 660 into a 1.3 motor. If so how difficult would it be? I think It would be a great idea to import the turbo and intercooler along with the factory turbo hood for my street zook.
To add to this question.
How bout adding that same turbo to the swift gt motor?
Top
Posts: 1046
Joined: Sun Dec 12, 2004 11:24 pm
Location: ACT

Post by Zute »

Do a search its been talked about a fair bit in here. The 660 is a three cylinder motor.
'2001 Disco td5
'90 Maruti Ute 1Ltr Lwb

Experience is something you don't get, until just after you need it.
Top
Posts: 389
Joined: Sat Mar 05, 2005 8:06 am
Location: campbelltown/penriff

turbo motor

Post by noelb1 »

the 660 comes out of a suzuki capucino (sp)?
Top
User avatar
Guy
Posts: 10366
Joined: Thu Dec 12, 2002 8:43 am
Location: Wangaratta

Post by Guy »

It was also avaliable in japan in the Jimnys, from memory there are a few versions one with an iron block and one with an alloy block (the alloy being the "better" of the two ...
" If governments are involved in the covering up the knowledge of aliens, Then they are doing a much better job of it than they do of everything else "
Top
Posts: 96
Joined: Fri May 20, 2005 5:13 pm
Location: Chicago

Post by zuku26 »

I know that the 660 is a 3 cyclinder, I'm curoius about the turbo found on it. I could find info about the turbo itself. I found info on swapping the 660cc motor with the turbo into a sierra, but not just the turbo onto a 1.3.
Love mud are you talking about the motor being iron and alloy or you talking about the turbo?
I hope the questions didn't confuse anyone.
I'm trying to find info on swapping just the turbo, intercooler and turbo jimny hood onto a 1.3l suzuki motor equiped sierra/samurai
Top
Posts: 79
Joined: Sat Jan 13, 2007 5:47 pm
Location: Ulverstone/Tassie

Post by bigzuk »

I would have thought the turbo from one of them would be way to small?

maybe try looking towards a small turbo from a 1jz?
Top
Posts: 96
Joined: Fri May 20, 2005 5:13 pm
Location: Chicago

Post by zuku26 »

To tell you the truth I guess I'm just liking the fact that there is a factory hood with scoop that has the matching intercooler and turbo. I guess I might be better off running a different turbo but use the intercooler from the jimny and jimny hood with scoop. I really don't want to run a very big turbo though, just small boost will do fine.
Top
Posts: 572
Joined: Thu Mar 31, 2005 10:17 pm
Location: Mooroolbark Vic

Post by Jaffa »

I think that the turbo off a F6A would be too small, from memory they are IHI brand but dont quote me on that. Here is a couple of pics comparing the exhaust wheel to a 10 sent coin (about 24mm) and a side shot to compare it to the air con compressor.
This motor was out of a half cut 199* jap spec "jimny"
Image

Image

Image
Top
Post Reply

Return to “Suzuki”

Who is online

Users browsing this forum: No registered users and 2 guests