Can i put a coily dash cluster into my 84 NT? or are the looms and plugs different?
i like the white dials plus its gotta tacho and i dont think i want an aftermarket one.
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Dash Cluster Compatibility
Well there could be a few problems, yours has a mechanical speedo, not entirely sure as I don't own one and haven't looked but a late coily may have electric.
Also if you don't have a tacho in the first place then you won't have the wiring and sensor so that will need to be put in.
Looms and plugs aren't really an issue, you can always cut things off and crimp/solder them together as long as they go to the right places.
Also if you don't have a tacho in the first place then you won't have the wiring and sensor so that will need to be put in.
Looms and plugs aren't really an issue, you can always cut things off and crimp/solder them together as long as they go to the right places.
Last edited by Dooley on Thu Jan 18, 2007 7:59 pm, edited 1 time in total.
Who is online
Users browsing this forum: No registered users and 2 guests