Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

wheel bering socket on GQ

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Forum rules
Post Reply
Posts: 308
Joined: Wed Feb 11, 2004 4:51 pm
Location: Adelaide, South Australia

wheel bering socket on GQ

Post by slowLux »

The wheel bearing sockets an odd size isnt it? like you need a real thin 19mm one or something? can i get these off the shelf at supercheap or somewhere? 88 GQ

thanks
80 GXL
Top
Posts: 20
Joined: Sun Jun 25, 2006 7:59 pm
Location: brindabella

Post by wharf »

I saw a couple for sale on ebay
Top
Posts: 3237
Joined: Sun Aug 21, 2005 7:24 pm
Location: victoria point qld

Post by dirtyGQ »

no they are a thin walled socket my old mechanic used a chisel so it rules out me ever using a socket at least till i get 2 new nuts. I know they have the right socket thingo on ebay.
Top
Posts: 2809
Joined: Mon Jan 02, 2006 5:03 pm
Location: Lara Victoria

Post by Ruffy »

The socket for the wheel bearing retaining nuts is 52 mm. There is a thin walled job to suit nissans or you can fit the toyota one on there if you remove the collar out of the hub...
I reckon you may be able to pick one up at supercheap. If not Hobzee sells them on ebay. Search the ebay stores for 'the4wdshop'.
Cheers, Dan
[quote="Uhhohh"]As far as an indecent proposal goes, I'd accept nothing less than $100,000 to tolerate buggery. Any less and it's just not worth the psychological trauma. [/quote]
Top
Posts: 308
Joined: Wed Feb 11, 2004 4:51 pm
Location: Adelaide, South Australia

Post by slowLux »

cheers, thanks heaps
80 GXL
Top
Posts: 1578
Joined: Wed Aug 31, 2005 12:27 am
Location: In The Good Country

Post by sudso »

Ruffy wrote:The socket for the wheel bearing retaining nuts is 52 mm. There is a thin walled job to suit nissans or you can fit the toyota one on there if you remove the collar out of the hub...
I reckon you may be able to pick one up at supercheap. If not Hobzee sells them on ebay. Search the ebay stores for 'the4wdshop'.
Cheers, Dan
A mate bought one off ebay, they are actually 53 or 54mm from memory.

You have to tighten the lock nut to 180Nm or something.
Bordertrek 4X4 & Fabrication
0400 250 734 Bordertown SA
I love terra firma-the less firma the more terra
Top
Post Reply

Return to “Nissan”

Who is online

Users browsing this forum: No registered users and 0 guests