Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
ebay fines
Moderator: Micka
ebay fines
these are not mine but seem like a real bargen
http://cgi.ebay.com.au/Range-rover-cust ... dZViewItem
http://cgi.ebay.com.au/Range-rover-cust ... dZViewItem
standard gq no mods ??? hehehe
The back spacing.... well from the wheel nut side of the wheel, from the hub to the outer lip measures 135mm... an from the inside to the outer lip measures 80 mm.. hope this is what you were after Dude. Any other questions i'll do my best to answer before the auction ends.
Outer limits an ebay are my 2 new best friends i was bitten on my left hand by a dog on new yeas eve, unfortunately cant lay bricks an the bank still wants there mortgage repayments
Outer limits an ebay are my 2 new best friends i was bitten on my left hand by a dog on new yeas eve, unfortunately cant lay bricks an the bank still wants there mortgage repayments
That is a truck engine - so 85Bhp pump instead of the 99Bhp the county had - also needs a modified sump, different oil filter and 12V starter to fit a LR.
Agreed a rebuild is about $5k to pay a mechanic to do, but an exchange reco engine from repco/gem is about the 7.5k mark.
Agreed a rebuild is about $5k to pay a mechanic to do, but an exchange reco engine from repco/gem is about the 7.5k mark.
_____________________________________________________________
RUFF wrote:Beally STFU Your becoming a real PITA.
Who is online
Users browsing this forum: No registered users and 3 guests