Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Wiring a 5 pin winch controller to dash?

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Forum rules
Post Reply
Posts: 45681
Joined: Wed Nov 27, 2002 10:13 am

Wiring a 5 pin winch controller to dash?

Post by bogged »

greg wrote:Do a search for a thread about wiring a winch controller into your dash. I've got one in my car and it's pretty handy to have.


does anyone know what the URL for this is?

ToNkA wrote:I did my own in about 20 minutes. Really easy to do.

When you doing mine? I'll bring the beers. :armsup: :D
Top
Posts: 3299
Joined: Fri Nov 08, 2002 8:28 am
Location: Sydney

Post by spazbot »

i have all the diragrams for wiring the 5pin controllers. but its pretty pointless posting them till photos return, if you search pirate you will find em there 2
www.overkill4x4.com
ph 94766137
Top
Posts: 2820
Joined: Sun May 25, 2003 10:04 am
Location: Redbank Plains, QLD

Post by Daisy »

http://www.pirate4x4.com/tech/billavista/8274/

Not the same winch.. but perhaps wiring is simliar??

Cheers

TOM
Top
Posts: 3299
Joined: Fri Nov 08, 2002 8:28 am
Location: Sydney

Post by spazbot »

hope this works


Image


Image
www.overkill4x4.com
ph 94766137
Top
Posts: 45681
Joined: Wed Nov 27, 2002 10:13 am

Post by bogged »

ok first time I saw that the 3rd image didnt come up.

thanks dude, will sus it out.

take care
Last edited by bogged on Mon May 24, 2004 5:41 pm, edited 1 time in total.
Top
Posts: 3269
Joined: Mon Nov 25, 2002 1:11 pm
Location: melting gears

Post by greg »

Bruce,

The post i can recall had a few photos in it that Guts (i think) posted up of his winch controller box with some wires attached in all the right spots to make it work.

If it helps - i have one of these things wired up on my winch too - you're more than welcome to have a look and take some photos of it if you like (sorry - i don't have a digital camera).

Cheers.
DMA Founding Member #1 - Now Retired
Top
Posts: 3299
Joined: Fri Nov 08, 2002 8:28 am
Location: Sydney

Post by spazbot »

if you open you winch solenoid box you will see the same thing as in the diagrams, wire colors etc, get a mate that is good with electronic to give you a hand, if no there is a place in the us that makes the setup ready to install into your cab
www.overkill4x4.com
ph 94766137
Top
Posts: 3269
Joined: Mon Nov 25, 2002 1:11 pm
Location: melting gears

Post by greg »

Here's the post i was talking about...

http://www.outerlimits4x4.com/PHP_Modul ... ight=winch

evidently i've built it up to be the best thread ever - but alas - it's just how to install the winch, not how to wire it up to the dash.
DMA Founding Member #1 - Now Retired
Top
Posts: 45681
Joined: Wed Nov 27, 2002 10:13 am

Post by bogged »

--------------------------------------------------------------------------------
ok first time I saw that the 3rd image didnt come up.

thanks dude, will sus it out.

take care
Top
Posts: 1614
Joined: Fri Feb 21, 2003 8:44 pm
Location: Melbourne

Post by landy_man »

the warn xd9000i diagram is incorrect...

the power switch on the left should have power coming into the switch in the "off" postion and going out to the control switch "B" from the "on" position....not as indicated
Top
Posts: 3299
Joined: Fri Nov 08, 2002 8:28 am
Location: Sydney

Post by spazbot »

true but if you want to get technical it dosnt matter if you are using a spst switch, as long as you make a 12 circuit when the swtich is thrown , it dosnt really matter what way you wire it into the switch
www.overkill4x4.com
ph 94766137
Top
Posts: 1614
Joined: Fri Feb 21, 2003 8:44 pm
Location: Melbourne

Post by landy_man »

provided there is no on/off markings
Top
Posts: 45681
Joined: Wed Nov 27, 2002 10:13 am

Post by bogged »

the warn xd9000i diagram is incorrect...

the power switch on the left should have power coming into the switch in the "off" postion and going out to the control switch "B" from the "on" position....not as indicated

_________________

so they are not all the same?
Top
Posts: 45681
Joined: Wed Nov 27, 2002 10:13 am

Post by bogged »

bogged wrote:the warn xd9000i diagram is incorrect...

the power switch on the left should have power coming into the switch in the "off" postion and going out to the control switch "B" from the "on" position....not as indicated

_________________

so they are not all the same?
ahhhhhhh....... time for fun again...
Top
Posts: 561
Joined: Tue Jan 04, 2005 2:25 pm
Location: Melbourne

Post by Cossie »

Bruce, isn't this the 2nd most asked question in the universe? (other than how to lift a GQ!)
I'm surprised you couldn't find it in a search. You did try the search button right? ;)

Just wire it as per the 3rd pic, thats correct for all 5 pins
The hardest thing about owning a jeep is telling your parents you're g a y!!
Top
Posts: 45681
Joined: Wed Nov 27, 2002 10:13 am

Post by bogged »

Cossie wrote:Bruce, isn't this the 2nd most asked question in the universe? (other than how to lift a GQ!)
I'm surprised you couldn't find it in a search. You did try the search button right? ;)

Just wire it as per the 3rd pic, thats correct for all 5 pins
we did, we just ran out of daylight :bad-words:
Top
User avatar
ddr
Posts: 589
Joined: Thu Jan 09, 2003 7:44 am
Location: Not where I wanna be

Post by ddr »

Do you trust me yet? Its simple.

But ill be adding in a little something extra to disable the Hand controller with the switch too. :cool:
Top
Post Reply

Return to “General Tech”

Who is online

Users browsing this forum: No registered users and 1 guest